Installing The Range Extender Battery - Hyena TREK FX+ Owner's Manual

6.4.

Installing the range extender battery

Before the range extender battery can be used, it must be installed on the e-bike.
Follow these steps to install the range extender on the e-bike:
STEP 1
Align the upper range extender's lock tab
with the top insertion at the mounting plate.
Be sure to insert in the right way, the
downtube cable will be face towards the
seat tube.
STEP 3
Make sure the range extender is attached
firmly to the mounting plate. Uncover the
charging socket cover on the downtube.
IMPORTANT
When the range extender battery is attached physically to the e-bike, it must also be attached
electrically to the bike.
HYENA E-BIKE SYSTEMS
STEP 2
Next, turn the lower lock tab of the range
extender to the bottom insertion in the
mounting plate. It should snap in and lock
in place.
STEP 4
Plug the downtube cable into the charging
port on the downtube to connect the in-tube
battery with range extender battery.
EN-GB - 14