Advertisement
Troubleshooting
Before calling the service centre, check the following points and see if you can
solve the problem yourself.
Problem
No refrigeration
The inner Temperature
is not cold enough.
Unusual noises
The outer surfaces are wet.
The inner surfaces are wet.
Possible Causes
- The chiller is not plugged in or switched on.
- The fuse protecting the hotpoint is blown.
- Wrong temperature selection.
- The chiller is overfilled.
- The appliance is exposed to direct sunlight or
other heat source.
- Frequent door openings.
- The appliance is not standing level.
- The chiller cabinet is touching the wall or other
item.
- It is normal to hear the noise of gas flowing
during the off cycle of the compressor.
- This may happen during periods of high humidity.
- Dry the surfaces thoroughly when necessary.
- The door has been opened frequently or been
kept open for too long.
- There is a large amount of uncovered produce
with high water content stored in the chiller.
- Dry the inner compartment thoroughly.
.8.
Advertisement
