Page 3
Introduction This Alarm is intended to be used as a device that provides a loud warning when it detects smoke to alert people of an immediate danger enabling them to evacuate their dwelling promptly. It must be installed in accordance with the latest standards and is for indoor use only.
Technical Specification 3V Lithium Battery (non replaceable) Power Supply Piezoelectric Horn Alarm Sounder 85dB(A) at 3 meters (except in Test Alarm Sound Level mode) All models Checks sensors, electronics, interconnection, battery and horn. If unit is in alarm when pressed, it Test/Hush Button silences the alarm for 10 min.
Important Safety Instructions The Alarm is designed to be permanently mounted. The mounting plate can be screwed directly to the ceiling or wall. The battery for this Alarm is in a sealed compartment. Do not attempt to open the Alarm to get access to the battery as it is not replaceable.
Interconnecting Alarms (Model dependent) With interconnected Alarms, when one Alarm detects fire all will sound. However, only Alarms detecting fire will have a flashing red LED. Heat Alarms must always be interconnected to Smoke or Multi-Sensor Fire Alarms to ensure early warning. WARNING: Do not hardwire interconnect battery powered Alarms with low voltage or mains Ei Electronics Alarms/devices or any other type of Alarm produced by another manufacturer.
Page 8
Ei630i, Ei630iRF, Ei660i, Ei660iRF Ei630i, Ei630iRF, Ei660i, Ei660iRF The Declaration of Performance may be consulted at www.eielectronics.com/compliance Contact Us Aico Ltd. Mile End Business Park, Maesbury Rd, Oswestry, Shropshire SY10 8NR, U.K. Tel: 01691 664100 www.aico.co.uk Ei Electronics. Shannon V14 H020, Co Clare, Ireland.
Need help?
Do you have a question about the Ei600 Series and is the answer not in the manual?
Questions and answers