Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kärcher HDS 798 C
Summary of Contents for Kärcher HDS 798 C
- Page 1 HDS 798 C 1.174 - ... www.karcher.com 5.959 - 368 (09/99)
- Page 2 HDS 789 C...
- Page 3 HDS 789 C...
- Page 4 HDS 798 C Operating Instructions Spare Parts List...
-
Page 5: Table Of Contents
English HDS 798 C Each time after usage CONTENTS Shut-down Important Safety Instructions Maintenance Environmental protection Maintenance intervals Overview Maintenance tasks Commissioning Cleaning strainer in water Checking oil level connection Filling with scale inhibitor Cleaning strainer in low Filling with fuel... -
Page 6: Important Safety Instructions
English HDS 798 C * DO NOT USE GASOLINE, Only Identical Replacement IMPORTANT SAFETY CRANCASE DRAININGS, OR OIL Parts.“ INSTRUCTIONS Prior to initial startup, operating CONTAINING GASOLINE OR * WARNING Risk of injection or manual and safety instructions SOLVENTS. injury-Do Not Direct Discharge * WARNING: RISK OF INJECTION Stream At Persons. -
Page 7: Overview
English HDS 798 C Fig. 3 For other water hardness classes, OVERVIEW COMMISSIONING Press down cover latch with call in KÄRCHER AFTER-SALES screwdriver or coin and turn counter- SERVICE to perform adjustment to Fig. 1 clockwise to open. local conditions. -
Page 8: Mounting Handgun
English HDS 798 C Mounting handgun Drawing in water from tank Mains connection OPERATION – Connect spray lance to handgun The following conversion work is Refer to technical data and rating – Insert high-pressure nozzle in necessary if water is to be drawn in plate for connected loads. -
Page 9: Setting Cleaning Temperature
English HDS 798 C Setting cleaning temperature Measuring out the cleaning agent Intended use Cleaning Set selector switch (1) to desired * Use cleaning agents sparingly to Cleaning of: Machines, vehicles, * Set pressure/temperature and temperature protect the environment buildings, tools, facades, terraces,... -
Page 10: Operation With Steam
English HDS 798 C – Motor vehicle cleaning, machine EACH TIME AFTER USAGE MAINTENANCE cleaning 60-90°C Frost will destroy unit if water is not Following operation with cleaning drained off completely! Set selector switch to desired agent temperature Store unit in a frost-free location * Disconnect unit from mains before –... -
Page 11: Maintenance Tasks
English HDS 798 C * With handgun open, use selector MAINTENANCE TASKS Changing oil FAULTS switch to switch unit on and off several times. Fig. 18 Fault * With handgun open, open and – Provide a collecting container for FUEL indicator lamp on Cleaning strainer in water close regulator (Fig. -
Page 12: Warranty
English HDS 798 C Non-return valve gummed up Set temperature not attained * Low water protection GENERAL INSTRUCTIONS – Pull off cleaning-agent hose and when working with hot water The low water protection stops the use blunt object to release non-... -
Page 13: Technical Data
English HDS 798 C TECHNICAL DATA HDS 798 C (1.174-...) Type Mains connection 200 V 200 V 3~ 50Hz 3~ 60Hz Connected load 5.2 kW 5.6 kW Fuse (slow blow) 16 A 16 A Water connection Supply temperature max. 30 °C Supply volume min. - Page 14 HDS 798 C...
Need help?
Do you have a question about the HDS 798 C and is the answer not in the manual?
Questions and answers