Page 1
5.960–913 02/2005AUS Operating Instructions Before first use of the unit read these operating instructions and act in accordance with them...
Page 2
Safety instructions for wet and dry vacuum cleaners particular the power supply cable Before start-up please Maintenance and the extension lead, are in read these instructions! Switch off the unit prior to perfect condition and are safe to cleaning and maintenance work Before start-up please read the operate.
Getting started The voltage indicated on the rating plate must correspond to the voltage of the power source. If, on unpacking the unit, you discover damage has been caused in transit please contact your sales office.
Page 4
The cartridge filter must remain in the unit Let it dry out before using it again for dry vacuuming. Cleaning with wet and dry floor nozzle Cleaning with crevice nozzle...
Care and Maintenance Always unplug the mains plug from the socket before performing any maintenance work. Empty dirt box, and rinse out if required. Clean filter by holding the filter under running water. Let it dry out before using it again for dry vacuuming.
Technical Specifications Warranty Voltage 240 V The applicable warranty conditions in different countries are issued by the respective national (1~50/60 Hz) distributor of KÄRCHER products. During the Class of protection warranty period, any malfunctions of the unit Mains fuse (slow) 10 A caused by a material or manufacturing defect Blower data:...
Need help?
Do you have a question about the A 2101 and is the answer not in the manual?
Questions and answers