Screen Configuration - Woodward easYgen-3000XT Series Manual

4 Configuration

4.3.2.3 Screen configuration

4.3.2.3 Screen configuration
Screen Configuration
ID Parameter
4103 Home screen data
4129 Oneline diagram with
mains
General notes
The home screen data configuration "Generator/Engine" offers an engine value indication.
With the following AnalogManagers the according sources can be configured and scaled.
The according AnalogManager has to be configured as 'Pass Through'.
ID Parameter
8891 AM Engine speed
174
Released
CL Setting range
[Default]
2
Generator
[Generator/Mains]
Generator/Busbar
Generator/Engine
2 Off
[On]
CL Setting range
[Default]
2 Determined by AnalogManager
81.24
[A1 = 11.51 Engine speed
[rpm]]
easYgen-3000XT Series
Description
: Home screen can display
several pre-defined data
collections.
Generator relevant information
are displayed.
Home screen is splitted and
displays generator and mains
related information.
Home screen is splitted and
displays generator and busbar
related information.
Home screen is splitted and
displays generator and engine
related information.
: Display of oneline (single
line) diagram on home screen can
be reduced NOT to show mains
symbols.
Notes
Softbutton for MCB is (visible and)
valid only if this parameter is
TRUE.
Description
With this AnalogManager the
according speed source may be
selected from the available data
sources.
Even it is possible to select all
data sources╚═▷ "9.4.2 Data
Sources AM"), only the following
data source may be used:
11.51 Engine speed [rpm]
The indication is displayed in the
format 0000 rpm.
B37574