Connecting The Fm/Am Antennas; Connecting To A Network - Yamaha HTR-7065 Owner's Manual

1 2 3 4 5
FM/AM antenna connections
5

Connecting the FM/AM antennas

Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
FM antenna
AM antenna
The unit (rear)
DC OUT NETWORK HDMI 1 HDMI 2 HDMI 3
HDMI OUT (BD/DVD)
5V 0.5A (NET)
1 2
ARC
ANTENNA
(RADIO) COMPONENT
COMPONENT
VIDEO VIDEO
AM FM REMOTE
P
R IN
P
R
OUT
P
B
P B
VIDEO
VIDEO
Y
Y
12V 0.1A
MONITOR OUT
TRIGGER OUT
Assembling and connecting the AM antenna
Hold down
• Unwind only the length of cable needed from the AM antenna unit.
• The wires of the AM antenna have no polarity.
6 7 8 9 10
Network connections
HDMI 4 HDMI 5
SPEA
FRONT CENTER SURROUND
Insert Release
6

Connecting to a network

Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
Internet
Network Attached Storage
(NAS)
WAN
PC
LAN
Modem
Router
Network cable
Mobile device
(such as iPod touch
DC OUT NETWORK
5V 0.5A (NET) HDMI
and iPhone)
1
ARC
COMPONENT
VIDEO
P
R
P
B
VIDEO
Y
OPTICAL COAXIAL COAXIAL OPTICAL
(TV)
AV 1 AV 2 AV 3 AV 4 AV 5
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.98).
• You can check whether the network parameters (such as IP address) are properly assigned to the unit in
"Network" (p.104) in the "Information" menu.
• Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
• Each server must be connected to the same subnet as the unit.
• To use the service via the Internet, broadband connection is strongly recommended.
PREPARATIONS ➤ Connecting the FM/AM antennas
HDMI 1 HDMI 2
OUT (BD/DVD)
2
ANTENNA
(RADIO) COMPONENT
VIDEO
AM FM
P
R
P B
VIDEO
Y
MONITOR OUT
The unit (rear)
AV
OUT
AV 6 AUDIO 1 AUDIO 2
32
En