1. Manuals
  2. Brands
  3. Dixie Narco Manuals
  4. Vending machines
  5. DNCB 168
  6. Parts service troubleshooting manual

Dixie Narco DNCB 168 Parts Service Troubleshooting Manual

Coca-cola marketing machine
Hide thumbs Also See for DNCB 168:

Advertisement

Table of Contents

Coca-Cola
Marketing Machine
T r o u b l e s h o o t i n g
Beginning Serial Number 0001-6501BW
P a r t s
S e r v i c e
M a n u a l
June 1998
Dixie-Narco Blvd.
P.O. Drawer 719
Williston, SC 29853-0719

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DNCB 168 and is the answer not in the manual?

Questions and answers

Related Manuals for Dixie Narco DNCB 168

Summary of Contents for Dixie Narco DNCB 168

  • Page 1 Coca-Cola Marketing Machine P a r t s S e r v i c e T r o u b l e s h o o t i n g M a n u a l Beginning Serial Number 0001-6501BW June 1998 Dixie-Narco Blvd.
  • Page 4 INDEX General Information ....................... Pages 3 through 5 Installation & Set-Up......................Pages 6 through 10 Hardware Configuration & Features..................Pages 11 through 13 SIID Audit Features......................Pages 14 through 18 Controller Programming..................... Pages 19 through 31 Programming Quick Reference.......................Page 32 Electrical Parts &...
  • Page 5 Persons not having the proper background may subject themselves to the risk of injury or electrical shock, which can be serious or even fatal. MODELS AND DETAILS DNCB 168 Height: 1439mm (56 11/16") Width: 711mm (28 5/16")
  • Page 6 DNCB 348 Height: 1829mm (72") Width: 940mm (37 1/16") Depth; 737mm (30 1/2") Shipping 330 (728 lbs) DNCB 360 Height: 1829mm (72") Width: 940mm (37 1/16") Depth: 737mm (30 1/2") Shipping 288 (634 lbs) DNCB 368 Height: 1829mm (72") Width: 940mm (37 1/16") Depth: 737mm (30 1/2")
  • Page 7 The age of Dixie-Narco products is determined by the date code incorporated in the serial number. The vender serial number takes the form xxxx-yyyyzz. The first 4 digits (xxxx) identify the specific vender. The next 4 digits (yyyy) identify the manufacturing run that the vender was built in. The last two alpha characters (zz) identify the quarter and the year the vender was built.
  • Page 8 ELECTRIC POWER NEEDED Refer to the cabinet serial number plate to determine the proper voltage and frequency the machine requires (domestically this requirement is 115 Volts, 60 Hertz). Domestic venders will operate properly at +/- 10% of the specified voltage. For domestic models this is between 103 volts and 127 volts. The cabinet serial plate also indicates the amperage of the vender.
  • Page 9 pricing is set return the vender to its operate mode either by closing the door or pulling the door closed switch out. "Prime" the coin changer by making a correct change transaction.
  • Page 10 PLACING THE VENDER ON LOCATION CAUTION: DO NOT TRANSPORT THE VENDER TO OR FROM THE LOCATION LOADED WITH PRODUCT OR DAMAGE TO THE VENDER MAY RESULT. The vender must be located on a solid, flat, and level surface. The vender must be p ositioned close enough to an electrical outlet that an extension cord is not required.
  • Page 11 SIID HARDWARE CONFIGURATION The hardware configuration for the SIID Controller consists of a main control board and a display board. The select panel consists of low voltage switches. Sold-out indicators are eliminated in the SIID. The select switches interface directly to the main controller. The motors used on the stack continue to be 115 VAC.
  • Page 12 - Programmable Space To Sales - Programmable space to sales is a feature which allows columns to be assigned to select buttons. Columns are dispensed evenly when more than one column is assigned to a select button or group of select buttons. - Select Panel Controller Programming - - Hand-held Controller Programming - The SIID vender has the capability to be programmed through the select panel.
  • Page 13 - Verifone/Debitek Card Compatible - The SIID is capable of interfacing to Debit Card and Data recording systems. At this time only a few such accessories have been tested by Dixie-Narco. If such accessories are to be used check with either Dixie-Narco or the accessory manufacturer about physical and electrical compatibility before attempting to interface such accessories to the SIID vender.
  • Page 14 In addition to retrieving audit data, every machine configuration parameter that can be programmed in the service menu can be programmed electronically via the DEX port. The following types of data can be configured electronically: Machine Identity Date and Time Price and Product Information Space to Sales Limited Access Control Parameters...
  • Page 15 0.75 0.60 Space to Sales Configuration: Selections: Columns 1 Cola 2 Cola 3 Cola 4 Apple Juice 5 Diet Cola 6 Diet Cola 7 Tea Limited Access: Days: Times: 11:00 to 12:00 and 13:00 to 14:00 Selections: 1 Cola 2 Cola 3 Cola 5 Diet Cola 6 Diet Cola...
  • Page 16 Vender Cash Accounting: BILLS & COIN IN COIN PAID OUT CASH OUT MANUALLY Recent Hist. Recent Hist. Recent Hist. 7.50 159.75 3.50 19.50 0.00 0.75 COIN TO BOX COIN TO TUBES BILLS IN 4.75 43.50 8.25 2.00 108.00 Sold Out Activity: Selection DATE TIME...
  • Page 17 MOVE THROUGH MENU: Press select buttons 1 & 2 simultaneously to scroll down through the menu. While scrolling down through menu, release, press select buttons 1 & 2 simultaneously to scroll up through menu. ENTER SUB-MENU: Press and hold select button 1 to enter a sub-menu. EXIT SUB-MENU: With "RTN"...
  • Page 18 COIN FILL MODE This section is used to count coins loaded in the top (separator) of the coin mech. Insert coins in the top (separator) of the coin mech. The total value of the coins will be displayed and will be counted in the DEX audit data, so the SIID controller knows exactly how much change is in the coin mech.
  • Page 19 To change date: Press & hold Select Button 1: set Month Press & hold Select Button 2: set Day Press & hold Select Button 3: set Day Of Week Sunday Thursday Monday Friday Tuesday Saturday Wednesday Press & hold Select Button 4: set Year Press &...
  • Page 20 Note: If "UN-0", the promotion is disabled. Press & hold Select Button 2: The number of free beverages to be delivered after the number of vends have occurred will increment from zero to 25 and then return to zero. Release the select button when the desired number of free beverages to be delivered is displayed.
  • Page 21 Some foreign note acceptors that use a pulsed signal to indicate the value of the note being accepted must have the value of that pulse (the note factor) programmed in the vender. The SIID will determine the value of the note inserted by multiplying the number of pulses counted by the Note Factor programmed.
  • Page 22 LAOD - LIMITED ACCESS ON DAYS: This function is used to set the days of the week for limited access. To vi ew the limited access on days condition, press and let go of any select button. The display will show "ENABLED ON DAYS - #(s)" Day of Week: Sunday Wednesday...
  • Page 23 SEC - SECONDARY PRICE MENU This function is used to program a second price for each selection. To enter the sub-menu press select button 1. The following are sub-menus of Secondary Price Menu: "S-P2", "PR2P", "PR2D" and "RTN". To move to User Options Menu press select buttons 1 &...
  • Page 24 RTN - RETURN This function is used to return to the User Options Menu. Press select buttons 1 & 2 simultaneously to return to "S-P2". Press select button 1 to return to "SEC". Press select buttons 1 & 2 simultaneously to move to the next item on the menu. ACD - SET ACD AUDIT BOX (Note: This feature is available in specific software rev.
  • Page 25 Important: Under certain conditions, if one of these coins is accepted and escrow return is done, the controller may not be able to pay back the credit as displayed and that coin will be lost. To show current "SCE" condition: Press any select button and the display will show the current setting.
  • Page 26 "SE-" - Select Switch Test Press any select button, and the display will indicate the number of the select button pressed. Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu. "SP-" - Sold Out Paddle Test Use this to test the sold-out switches if the vender is empty.
  • Page 27 AUTO - Auto Testing This function is used in Dixie-Narco’s manufacturing process and is not intended for use in the field. Its purpose is a self-test routine to check the SIID components listed. For further details contact Dixie-Narco Factory Service. A.
  • Page 28 (Note Acceptor Test) (Display Test) VERS (Software Version) VNDR (Vender Identification) (Return) AUTO (Auto Testing) A. Press & hold buttons 1 & 2 simultaneously to move through the menu from top to bottom. B. Press select button 1 to move left or right in the menu, depending on the menu prompt on the display.
  • Page 29 The normally closed contact of the Sold Out Switch has no function. The normally open contact of the Sold Out Switch is in the Sold Out Circuit (kept open by a can or bottle). When not kept open by a can or bottle, the normally open contact closes and completes the Sold Out Message Circuit via the SIID Controller Board.
  • Page 30 497,071,000.03 - T-Models Sold Out Spring #901,700,740.01 Sold-Out Switch Assy. Snap In #804,100,750.01 (Insulator and Switch are one piece) Sold-Out Paddle Wide and Narrow #432,070,190.13 VEND MOTOR NARROW COLUMN Mounted on the Vender with the Vend Motor Switch on the underside (See Fig. 1). The shaft of the Vend Motor slides into a slot in the Vend Rotor (See Fig.
  • Page 31 TB 452 Miscellaneous Worldwide Non-Returnable Bottle Shimming, T-Models TB 453 Miscellaneous Worldwide Plastic Bottle Shimming, Shimless Stack Series 90 TB 454 Miscellaneous Worldwide Non-Returnable Bottle Shimming, Shimless Stack Series 90 TB 455 Miscellaneous Worldwide Can Shimming, T-Models TB 456 Miscellaneous Worldwide Returnable Bottle Shimming, Shimless Stack Series 90 TB 457 Miscellaneous Worldwide Returnable Bottle Shimming, Wide Stack Series 90 TB 473 Miscellaneous Worldwide Non-Returnable Bottle Shimming, Wide Stack Series 90 TB 474 Miscellaneous Worldwide Plastic Bottle Shimming, Wide Stack Series 90...
  • Page 32 5. Vending Cam For: a. DNCB 1¼" deeper narrow column. b. DNCB T-models single, double, or triple depth narrow column. c. Color of Cam is Brown. d. Part #801,806,180.21 CAM INSTALLATION AND REMOVAL TO INSTALL A VENDING CAM: 1. Select the Vending Cam required (See page 39). 2.
  • Page 33 2. The Vend Rotor must be in the loading position when the Motor shaft is inserted in the end of the Rotor. See Fig. 8. 3. Insert the Motor shaft in the Rotor and secure the Motor. 4. Install the Vending Cam on the front shaft of the Motor making sure the Lock Tab is at the 9 o'clock position. See Fig 7.
  • Page 34 2. If necessary, use a mild soap to loosen any dirt or grime. To prevent damage, DO NOT SCRUB or use a brush or squeegee, as some signs have a clear ultraviolet resistant coating to prevent yellowing. 3. Repeat the above steps as necessary, then dry using a soft cloth to prevent spotting. CABINET 1.
  • Page 35 Check control board. 3. Problem: One column sold out, but still vends. Troubleshooting: Check sold-out switch. Check for bad connections or broken, backed out, or crossed wires from sold-out switch to control board. (Note: Check wires on left side of vend motor cover.) 4.
  • Page 36 SIID COIN / CURRENCY 1. Problem: Will not accept coins or bills. Troubleshooting: Check coin return lever is not pressed. Check F3 peripheral (1.0 Amp) fuse. Go to diagnostics and test. 1. Will not take coins, replace coin mech. 2. Still will not take coins, check connections and mech harness. Check for bad connections or broken, backed out, or crossed wires from validator/changer to control board.
  • Page 37 SIID COIN / CURRENCY 10. Problem: Install bill, unplug vender, plug in vender, gives $1 credit and bill back. Troubleshooting: Set Escrow to "Pr" or "ES-4" Install current software. -5 or 380.11 or greater two-button programming. -3.16 or 390.11 or greater four-button programming. 11.
  • Page 38 Check control board. 2. Problem: Display will not function. Troubleshooting: Check for bad connections or broken wires from display to control board. Check F1 motor power fuse (1.6 Amp). Check display board. Check transformer. Check control board. 3. Problem: Display shows $1 and then increases in dollar increments. Troubleshooting: Check coin mech.
  • Page 39 12. Problem: Display shows "LOC". Troubleshooting: Can only be accessed via DEX or hand-held. Check control board. 13. Problem: Will not show vend price on display. Troubleshooting: All vend prices on primary price have to be the same price, and all prices on secondary price have to be the same price.
  • Page 40 compressor housing from which it also takes heat before going back outside of the vender. The condenser fan runs when the compressor motor runs. FILTER/DRYER The filter/dryer is in the liquid line between the condenser and the capillary tube. This dryer filters out any foreign particulate matter and also contains a desiccant to absorb any moisture that may be present in the system.
  • Page 41 GLOSSARY Direct Exchange of Data "Dixie Bus" Dixie-Narco Serial Communication Specification to allow Dixie-Narco to add extra features without affecting current vender designs. Infrared Liquid Crystal Diodes Light Emitting Diodes Multi-Drop Bus Coca-Cola Serial Communication Specifications. Used in all Dixie SIID can venders. NAMA National Automatic Merchandising Association Uniform Communications Standards...

  • Page 42: Table Of Contents

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. TABLE OF CONTENTS Main Door Exterior........................ Page 4 Main Door Interior ......................... Page 7 Pull Out Handle & Coin Insert ...................Page 10 Select Panel / Coin Insert Panel..................Page 12 Lighting ..........................Page 15 Wiring Harness........................Page 16 Inner Door ..........................Page 18 Two-Bar Linkage / Nut Re tainer Housing ...............Page 20 Hinges and Roller Assy.
  • Page 43 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 44: Main Door Exterior

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. MAIN DOOR EXTERIOR ITEM # DESCRIPTION PART NUMBER Coke Marketing Machine, Door Assy. 72" Wide -13 S3D 624,053,30x.x3 72" Narrow -13 S3D 624,053,50x.x3 79" Wide -13 S3D 624,053,00x.x3 72" Wide -9 S2D 624,053,20x.x3 72"...
  • Page 45 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM # DESCRIPTION PART NUMBER Advertise Window 72" Wide and 72" Narrow 805,025,32x.x1 79" Wide 805,025,31x.x1 Port Panel Wide / Narrow 624,050,53x.x3 Hinges, Main Door Assy, Top 624,052,90x.x3 Assy, Bottom 801,305,13x.x1 Advertise Window Card 803,853,88x.x1 Decal, Port Panel 803,854,42x.x1...
  • Page 46 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 47: Main Door Interior

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. MAIN DOOR INTERIOR ITEM # DESCRIPTION PART NUMBER Delivery Port (Large Port) 801,810,68x.x1 Delivery Port Spacer (Large Port) W/A Trim Spacer 624,052,40x.x3 Right Side 624,050,64x.x3 Left Side 624,050,63x.x3 Port Stiffener Wide / Narrow 624,050,03x.x3 Access Door (prior to 6506AX) Wide / Narrow...
  • Page 48 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM # DESCRIPTION PART NUMBER Access Door Anti Vandal Bracket Wide 805,701,02x.x1 Access Door Jamb Wide / Narrow (prior to 6506AX) 805,700,97x.x1 Wide / Narrow (0001-6506AX and higher) 805,701,09x.x1 Coin Chute Bracket 805,701,01x.x1 Standoff .192x.312x.312 901,001,46x.x1...
  • Page 49 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 50: Pull Out Handle & Coin Insert

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. PULL OUT HANDLE & COIN INSERT ITEM # DESCRIPTION PART NUMBER Assy. T-handle 801,518,20x.x1 T-Handle Flange 801,518,18x.x1 T-Handle Only 801,518,14x.x1 T-Handle Stud 801,518,17x.x1 Coin Chute Assy. 624,052,60x.x3 Coin Return Assy. 624,052,50x.x3 Push Button Coin Return 801,807,25x.x1 Coin Return Button Bracket 624,050,23x.x3...
  • Page 51 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. COIN INSERT PANEL SELECT PANEL...

  • Page 52: Select Panel / Coin Insert Panel

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. SELECT PANEL / COIN INSERT PANEL ITEM # DESCRIPTION PART NUMBER Select Panel Assy. 12 Select 624,051,80x.x3 8 Select 624,051,90x.x3 Select Panel Stud Assy. 12 Select 624,052,00x.x3 8 Select 624,052,10x.x3 Select Button 801,810,62x.x1 Select Button Retainer .063x1 624,050,12x.x3...
  • Page 53 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM # DESCRIPTION PART NUMBER Validator Filler Plate Gasket 902,001,02x.x1 Spacer, Bill Validator 624,050,84x.x3 Coin Insert Label S3D 803,853,85x.x1 Screw, Phil Pan #4-24x¾ 900,300,47x.x1 Keps Nut ¼-20 900,800,67x.x1 Keps Nut 8-32 900,800,50x.x1...
  • Page 54 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 55: Lighting

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. LIGHTING ITEM # DESCRIPTION PART NUMBER Fluorescent Bulb 1A F64T12/D H/O (72") 804,700,37x.x1 F72T12/D H/O (79") 804,700,36x.x1 1B F42T12D H/O (72") 804,700,64x.x1 F48T H/O (79") 804,700,39x.x1 1C 48" T8 Metric Philips TLD 36W/840 NG (export) 804,700,66x.x1 60"...

  • Page 56: Wiring Harness

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. WIRING HARNESS ITEM # DESCRIPTION PART NUMBER Cabinet Harness SIID-9 (Cam and Sold-Out Switch Harness) 804,915,04x.x1 SIID-7 804,917,01x.x1 Door Harness CC-9 Electronic 804,914,04x.x1 CC-10 Electronic 804,913,89x.x1 CC-11, 12, 13 Electronic without Sold-Out Lights 804,913,92x.x1 CC 11,12, 13 Electronic with sold out lights 804,916,07x.x1...
  • Page 57 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.
  • Page 58 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 59: Inner Door

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. INNER DOOR ITEM # DESCRIPTION PART NUMBER Inner Door Assy. 79" Wide 624,051,00x.x3 72" Wide 624,051,10x.x3 72" Narrow 624,051,20x.x3 Inner Door Gasket 79" Wide 801,804,07x.x1 72" Wide 801,804,06x.x1 72" Narrow 801,804,03x.x1 Knob 901,501,70x.x1 Discharge Frame Assy.
  • Page 60 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 61: Two-Bar Linkage / Nut Retainer Housing

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. TWO-BAR LINKAGE / NUT RETAINER HOUSING ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Linkage and Drive Arm Assy. All Styles Groove Pin, 1/8x1 3/16 (30mm) - T2 All Styles 900,901,94x.x1 900,901,94x.x1...

  • Page 62: Hinges And Roller Assy

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. HINGES AND ROLLER ASSY. ITEM DESCRIPTION DNCB 600E DNCB 501E 79" Wide 72" Wide Roller, Main Door All Styles 901,806,20x.x1 901,806,20x.x1 Roller Pin All Styles 900,502,19x.x1 900,502,19x.x1 Assy., Top Hinge (drop in pin) E-Models All Styles 624,052,90x.x3 624,052,90x.x3 Top Hinge (drop in pin) E-Models All Styles...
  • Page 63 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.
  • Page 64 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.
  • Page 65 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 66: Cabinet Interior

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. CABINET INTERIOR ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Foam Cabinet Assy. All Styles 624,000,50x.x3 624,000,30x.x2 624,000,10x.x3 Stack Assy. Single Price - Cans 610,070,30x.x3 609,071,00x.x3 SIID - Cans 610,070,50x.x3 609,071,20x.x3 Single Price - Bottles...
  • Page 67 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Trim Access Hole Stiffener All Styles 801,807,10x.x1 801,807,10x.x1 801,807,10x.x1 Caterpillar Grommeting All Styles 801,809,93x.x1 801,809,93x.x1 801,809,93x.x1 Kydex Door All Styles 801,903,34x.x1 801,903,34x.x1 801,903,34x.x1...
  • Page 68 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.
  • Page 69 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 70: Cabinet And Vend Mechanism

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. CABINET AND VEND MECHANISM ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Vend Motor Cover Assy. All Styles 609,070,43x.x3 609,070,43x.x3 615,070,07x.x3 Vend Motor Assy., Wide Single Price 609,070,60x.x3 609,070,60x.x3 SIID...
  • Page 71 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. 220-240V 804,500,52x.x1 804,500,52x.x1 804,500,52x.x1...
  • Page 72 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Evaporator Fan Motor Bracket All Styles 164,040,08x.x3 164,040,08x.x3 164,040,08x.x3 Evaporator Fan Blade All Styles (AD775CW32S or FV775CW30S) 801,303,27x.x1 801,303,27x.x1 801,303,27x.x1 Chute Assy., Can/Bottle Standard...
  • Page 73 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Screw, Phil Pan 8-18x1/2" 900,301,84x.x1 Screw, Hex Washer Type 1 #8-32x3/8" 900,303,08x.x1 Speed Nut 900,800,85x.x1 Pop Rivet, Steel (Zinc Plated) 1/8" 901,100,61x.x1 Pop Rivet, Aluminum 1/8"...
  • Page 74 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 75: Refrigeration System

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. REFRIGERATION SYSTEM ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Complete Refrigeration System All Styles Domestic (1203C-E) 609,040,90x.x3 609,040,90x.x3 609,040,90x.x3 1/3 HP 220-240/50 "E" (1223-E IEC) 609,041,10x.x3 609,041,10x.x3 609,041,10x.x3 1/3 HP 220-240/50 "E"...
  • Page 76 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Main Wiring Harness United States & Mexico 804,902,22x.x1 804,902,22x.x1 804,902,22x.x1 Fan Housing Assy. Double 609,044,00x.x3 609,044,00x.x3 Narrow 493,040,10x.x3 Temperature Control All Styles 802,800,50x.x1 802,800,50x.x1...
  • Page 77 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Tinnerman Clip, Fan Shroud 900,901,89x.x1 Tinnerman Clip 900,902,18x.x1 Grommet, Admiral #B53351 901,806,77x.x1 Silencer 902,100,29x.x1 Clamp, Nylon 3/4" Heyco 3382BL 901,900,55x.x1 Cable Tie, 5 1/2"...
  • Page 78 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.

  • Page 79: Electronic Components

    COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ELECTRONIC COMPONENTS / MISC. LABELS ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Control Board 804,915,10x.x1 804,915,10x.x1 804,915,10x.x1 SIID 804,911,83x.x1 804,911,83x.x1 804,911,83x.x1 Display Board Assy. 804,914,11x.x1 804,914,11x.x1 804,914,11x.x1 SIID Control Board Curtain 801,903,38x.x1...
  • Page 80 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. ITEM DESCRIPTION DNCB 600E DNCB 501E DNCB 276E 79" Wide 72" Wide 72" Narrow Coke Product Label 803,843,43x.x1 803,843,43x.x1 803,843,43x.x1 Price Label 803,843,44x.x1 803,843,44x.x1 803,843,44x.x1 Non SII Price Label VRV 803,836,16x.x1 803,836,16x.x1 803,836,16x.x1 Coin Mechanism 903,901,29x.x1 903,901,29x.x1...
  • Page 81 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.
  • Page 82 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. SCREWS & NUTS ITEM PART NUMBER PART NAME AND DESCRIPTION 900,301,70x.x1 Screw, Phil Pan Swage Form #6 - 32 x 3/8" 900,301,64x.x1 Screw, Phil Pan Swage Form w/washer #8 - 32 x 1/2" 900,301,83x.x1 Screw, Phil Pan Swage Form #10 - 32 x 5/16"...
  • Page 83 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC.
  • Page 84 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. WASHERS, BOLTS, & MISC. HARDWARE ITEM PART NUMBER PART NAME AND DESCRIPTION 900,700,60x.x1 Washer, Delrin .040 Thick 3/8"IDx5/8"OD 901,303,77x.x1 Washer, Door Hinge All Styles Washer, Flat #2949 (T-Handle) 901,503,08x.x1 Washer, Hex #29-34 (T-Handle) 900,700,36x.x1 Lockwasher, Split 3/8"...
  • Page 85 COCA-COLA MARKETING MACHINE SERVICE MANUAL DIXIE-NARCO, INC. 900,901,80x.x1 Clamp, Nylon 1/2" Heyco 3328 ITEM PART NUMBER PART NAME AND DESCRIPTION 901,901,06x.x1 Hand Tie, 5.5" 901,902,01x.x1 Wire Tie, 7 1/2" 901,901,00x.x1 Wire Ties, 4" 901,900,55x.x1 Clamp, Nylon 3/4" Heyco 3382BL 901,902,83x.x1 Cable Tie, 5.5"...

This manual is also suitable for:

Dncb 180Dncb 276Dncb 300Dncb 348Dncb 360Dncb 368 ... Show all

Table of Contents