Installation Instructions - Haier AU84NXTBAA Installation Manual

Outdoor unit free multi air conditioning system
Hide thumbs Also See for AU84NXTBAA:
Table of Contents

Advertisement

Installation Instructions

CAUTIONS: To ensure proper installation, read "Cautions" carefully before working.
After installation, start the unit correctly and ensure that you show the
customer how to operate and maintain the unit.
Meanings of Warning and Cautions:
WARNING Incorrect operations may result in death or serious injuries.
CAUTION Incorrect operations may result in damage to the air conditioning unit.
Installation work must be carried out by professional qualified people, do not install the unit by
yourself. Incorrect installation will cause water leakage, electric shock and potentially fire.
Install the unit as per the Manual. Incorrect installation will cause water leakage, electric shock or
fire risk.
Be sure to use specified accessories and parts. Otherwise, water leakage, electric shock, fire risk or
unit falling down may occur.
Mounting position must be strong enough to hold the unit. Or, the unit will potentially fall down
causing injuries.
When installing the unit, take in consideration storms, & high winds Incorrect installation may cause
the unit to fall down.
All electric work should be carried out by experienced personnel as per current regulations and this
Manual. Incorrect installation or undersized electric cable may cause electric shock or fire risk.
All circuits must be earthed. Ensure that no external forces will affect the terminal block and electric
cable. Poor wiring and installation may cause fire risk.
Arrange wire connection between connecting the indoor and outdoor power supply correctly. Fix
terminal cover firmly to avoid overheating, electric shock or even fire risk.
In the case of a refrigerant leakage during unit installation, keep the room well ventilated.
Check the unit upon installation. Be sure there is no leakage. Refrigerant will induce a poisonous
gas subject to heat.
Isolate power supply before touching terminal block.
All units shall be earthed. The earth must not not be connected to a gas pipe, water pipe, or
telephone line. Poor earthing could cause electric shock.
Be sure to install a circuit breaker to avoid electric shock.
Arrange water drainage according to this Manual. Cover pipe with insulation materials to prevent
condensation occuring. Improper installation of water drainage will cause water leakage.
T o maintain good picture or reduce noise, keep the unit at least 1 m from T .V . radio, when installing
the indoor and outdoor unit, connecting wire and power supply. (If the radio wave is relatively
strong, 1 m is not enough to reduce interference).
Do not install the unit in following places:
(a) Oil mist or oil gas exists, such as kitchen, or, plastic parts may age, or water leakage.
(b) Where there is corrosive gas. Copper tube and welded part may be damaged due to corrosion,
causing leakage.
(c) Where there is strong radiation. This will affect the unit's control system, causing malfunction of
the unit
(d) Where flammable gas, dirt, and volatile matter (thinner, gasoline) exist, These items will cause a
fire risk.
Do not fail to show your customer how to operate the unit.
WARNING!
CAUTION!

Advertisement

Table of Contents
loading

Table of Contents