Advance Planning; Before You Begin - Thermador VCIN36JP Installation Manual

Advance Planning

Before You Begin

Parts Included
1 – 1000 CFM integral blower
(VCIBxxJP models only)
1 – Metal transition with backdraft
damper
2, 3, or 4 – Stainless steel baffle filters
(depending on model size)
2 – Filter spacers
2 or 3 – Grease trays (depending on
model size)
1 – Liner (VCIBxxJP models only)
4 – Side trims (VCINxxJP models only)
2 or 4 – Halogen lights, installed
(depending on size)
1 – Remote blower adaptor
1 – Fastener assortment
Literature packet
CAUTION
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned
ON accidentally.
Tools and Parts Needed
Blower motor (VCINxxJP models only)
Ductwork as necessary (style varies, see Table 3)
Additional sheet metal screws (as necessary for ductwork
installation)
1'' (25.4 mm) Strain relief
Aluminum tape (DO NOT use duct tape)
1/2'' (13 mm) Conduit if required (follow local codes)
Framing material (as necessary for framework)
Circular saw or jigsaw
Tape measure
Phillips head screwdriver
Protective work gloves
Optional accessories available for separate purchase.
Refer to www.thermador.com for more details.
LINER236 – 36'' Custom Hood Liner
LINER248 – 48'' Custom Hood Liner
LINER254 – 54'' Custom Hood Liner
TRIM236 – 36'' Custom Hood Trims
TRIM248 – 48'' Custom Hood Trims
TRIM254 – 54'' Custom Hood Trims
VCI2REMKS – Remote Control Panel
EXTNCB25 – 25 ft. Blower Connection Cable
PA36JBS, PA48JBS – Backsplash
English 3