HP iPAQ h6315 Networking Manual page 17

Managing wireless networks
Viewing or editing a network
To view or edit an existing or available wireless network, perform the following steps:
1. Turn on the WLAN.
2. Tap the Connectivity icon in the Navigation bar, tap Settings > Advanced tab > Network Card,
and then select the Wireless tab. In the Wireless networks box, tap name of the desired network
to review or edit. Or on the Start screen, tap Settings > Connections tab > Connections icon >
Advanced > Network Card > Wireless tab. Tap the network desired to review or edit.
3. If edits are made to the existing settings, then tap OK to save the new settings.
Deleting a network
To delete a wireless network, perform the following steps:
1. Turn on the WLAN.
2. Tap the Connectivity icon in the Navigation bar.
3. In the Connectivity pop-up box, tap Settings, the Advanced tab, Network Card, and then the
Wireless tab.
4. In the Wireless networks box tap the name of the desired network to delete, and hold down the
stylus for a few seconds until the Connect/Remove Settings drop-down box appears. Tap Remove
Settings. Or on the Start menu tap Settings, the Connections tab, the Connections icon, the
Advanced tab, and then Network Card. Tap the Wireless tab, highlight the desired connection to
delete, and hold the stylus down a few seconds until the drop-down box appears.
5. Tap Remove Settings.
Monitoring signal strength and status
Perform the following steps to view the signal strength between the HP iPAQ Pocket PC h4100 or
h4300 series handheld device and the access point WLAN connection:
Note: The signal strength icon will only display when a connection is present.
1. Tap the Connectivity icon (
of network the HP iPAQ is connected to (Work or Internet). Displayed next to the network type
(either Internet or Work) is the field Wireless Card, followed by vertical green bars. Four bars
indicate the strongest signal strength.
Figure 3. The WLAN signal strength indicator
2. To make changes to the connection, tap Settings.
3. To exit the Connectivity box, tap the Hide button.
) in the Navigation bar. The Connectivity box displays the type
or
17