Electrolux Cycloniclite Z711 Series Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Vacuum Cleaner
  5. Cycloniclite Z711 Series
  6. Manual
Electrolux Cycloniclite Z711 Series Manual

Electrolux Cycloniclite Z711 Series Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
z71xx_ifu.qxp
2005.11.11.
11:37
Page 2
Thank you for choosing an Electrolux Cycloniclite vacuum cleaner. These
operating instructions cover all Cycloniclite models. This means that with
your specific model, some accessories may not be included.
3
4
4
5
5
5
5
6
7
8
9
10
2

Advertisement

Table of Contents
loading

Related Manuals for Electrolux Cycloniclite Z711 Series

Summary of Contents for Electrolux Cycloniclite Z711 Series

  • Page 1: Table Of Contents

    2005.11.11. 11:37 Page 2 Thank you for choosing an Electrolux Cycloniclite vacuum cleaner. These operating instructions cover all Cycloniclite models. This means that with your specific model, some accessories may not be included. Accessories and safety precautions Before starting...

  • Page 2: Accessories And Safety Precautions

    • Regularly check that the cable is not damaged. Never use the vacuum cleaner if the cable is damaged. All service and repairs must be carried out by an authorised Electrolux serv- ice engineer. Always keep the vacuum cleaner in a dry place.

  • Page 3: Before Starting

    z71xx_ifu.qxp 2005.11.11. 11:37 Page 4 BEFORE STARTING Always operate the cleaner with the dust container installed. Always operate the cleaner with the filter set property installed. Insert the hose until the catch clicks to engage (press the catch to engage hose). Attach the metal extension tubes to the hose handle and the floor nozzle.

  • Page 4: Removing The Contents Of The Dust Container

    z71xx_ifu.qxp 2005.11.11. 11:37 Page 5 REMOVING THE CONTENTS OF THE DUST CONTAINER Always operate the cleaner with the dust container installed. 1. Remove the dust container by using the open button on the handle. 2. Remove the filter set by pushing the button. 3.

  • Page 5: Cleaning The Hose And The Nozzle

    z71xx_ifu.qxp 2005.11.11. 11:37 Page 6 CLEANING THE HOSE AND NOZZLE The vacuum cleaner stops automatically if the nozzle, tube or hose becomes blocked, or the filters are blocked. Disconnect from the mains and allow the vacuum cleaner to cool down for approximately 20-30 min- utes.

  • Page 6: Troubleshooting And Customer Information

    3. Are the filters blocked? Water has entered the vacuum cleaner It will be necessary to replace the motor by an authorised Electrolux serv- ice engineer. Damage to the motor caused by the penetration of water is not covered by the warranty.

  • Page 7: Electrical Supply Instructions

    Permanently connected to the cleaner is a mains supply (2-core) cable fitted with In case of doubt, have it done by a qualified electrician, as Electrolux cannot regard a non-rewirable plug incorporating a 13A fuse. In the event of the fuse requiring the repair of faults on the plug connection as a service that can be given free of replacement the fuse cover should be removed using a small screwdriver.

  • Page 8: Warning Instructions

    z71xx_ifu.qxp 2005.11.11. 11:37 Page 9 When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL THE INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING To reduce the risk of fire, electric shock, or injury: • Do not use out doors or on wet surfaces. •...

  • Page 9: Guarantee 10

    The guarantee may be invalidated by unauthorised repair or modification of the appliance. d. You may be charged by the Electrolux Group if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.

Table of Contents