Table of Contents
Advertisement
Available languages
Available languages
PRODUCT USAGE
3
Tab
Notch
Place the desired Grinding Plate over the
Blade, matching the notch of the plate
with the tab on the bottom of the Main
Housing.
ASSEMBLING THE ATTACHMENT TO THE STAND MIXER
1
Turn the Stand Mixer off and unplug.
3
Insert the attachment shaft Housing into
the attachment hub.
W11453578A.indb 5
W11453578A.indb 5
4
Place the Collar on the Main Housing,
turning clockwise by hand until secured but
not tightened.
2
Remove the attachment hub cover.
4
Tighten the Stand Mixer attachment hub
knob until the attachment is completely
secured to the Stand Mixer.
5
4/17/2020 2:07:52 PM
4/17/2020 2:07:52 PM
Advertisement
Table of Contents
