Upgrading To Wave Table Quality - HP Vectra VL6 7 Online Manual

4 In your sequencer program, for each track select an output port, a channel
number, and a patch number or name:
•
The output port defines where the track is to be sent for playback. For
example, select
your keyboard. Bear in mind how many different instrument voices your
keyboard is capable of playing back at the same time.
•
The channel number lets you "tune in" a particular keyboard or module to this
track. Do not select the same channel number for two different tracks unless
they use the same patch (voice).
•
The patch is the instrument voice. Your sequencer program may let you select
a MIDI patch number or an instrument name.
5 On your keyboard instrument, select a channel number or numbers on which to
receive MIDI information. The channel number(s) depends on which track(s) you
want to play back through your keyboard, as set up in your sequencer program. If
in doubt, select channels 1, 2, 3, and so on. You can usually change the channel
number(s) as you play back a piece of music.

Upgrading to Wave Table Quality

If you are running Windows 95, you can upgrade your MIDI playback to wave table
quality by installing the wave table software that is included on your CD-ROM. For
instructions on how to install this software, refer to "Upgrading to Wave Table
Quality" in Installing Your Multimedia Sound Kit guide.
for the computer's sound board or
FM Synth
Using Sound on Your PC
Upgrading to Wave Table Quality
for
MIDI Out
English 21