Function; Door Contact Switch (S24); Fault Repair; Cleansteel Surface Scratched - Miele DGC 6 Series Technical Information

Technical Information
2

Function

2.1

Door Contact Switch (S24)

If the door is opened during a cooking cycle, the door contact switch provides
a signal to the electronic and the steam generator heater elements (1R25,
2R25, 3R25) are switched off.
3

Fault Repair

3.1

CleanSteel Surface Scratched

Cause:
A cleaner unsuitable for use with CleanSteel was used.
Remedy:
Do not clean the cavity with abrasive cleaning agents; see the operating
instructions.
4

Service

4.1

Removal from a Housing Unit

1. Remove all accessories from the cavity.
2. Remove the retaining screws; see Figure 010-1, Item 1.
3. Remove the appliance.
4. Disconnect the power connection.

Figure 010-1: Removing the Appliance from a Housing Unit

16
DGC 6xxx