Page 1
Trane XR202 Programmable Thermostat TCONT202AS11MA Installation and User Guide ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES IMPORTANT — This Document is customer property and is to remain with this unit. These instructions do not cover all variations in systems or provide for every possible contingency to be met in connection with the installation.
Installation and User Guide Installation and User Guide Contents Safety ................2 Test Modes Product Specifications ........... 3 Fan Operation ............9 General Information ............3 Heating System ........... 9 Overview .............. 3 Cooling System ........... 9 Contents ............... 3 Thermostat Overview Accessories ............
Trane XR202 Programmable Thermostat Product Specifications SPECIFICATION DESCRIPTION Product Models TCONT202 Product XR 202 Size 3-3/4” x 6” x 1-1/8 (HxWxD) Configurations Heat / Cool Maximum Number of Stages 1H, 1C Operating Temperature 32°F to 105°F (0 to +41°C) / 90% RH Non Condensing Shipping Temperature Range -20 to 150°F (-29 to +65°C)
Installation and User Guide FIGURE 1. PLACEMENT OF THE 202 Record color and terminal marking of each wire. Disconnect the wires from the existing thermostat being careful not to allow them to fall back into the wall. Correct Incorrect Natural heat Ceiling Fan dissipation Remove the existing thermostat from the wall.
Trane XR202 Programmable Thermostat Wiring Diagrams Cooling with TAM7/TAM9 (24V Mode) Thermostat Indoor Unit Outdoor Unit NOTES: 1) Wire third party condensate over ow switches between Y of the thermostat and Y1 of the air ow control board 2) X2 is required to energize aux heat...
Installation and User Guide Cooling with S9V2 Furnace Thermostat Indoor Unit Outdoor Unit NOTES: 1) Wire third party condensate over ow switches between Y of the thermostat and Y1 of the air ow control board 2) X2 is required to energize aux heat during defrost Heat Cool Package with Variable Speed Blower Thermostat...
Trane XR202 Programmable Thermostat Heat/Cool Package Thermostat NOTES: 1) Wire third party condensate over ow switches between Y of the thermostat and Y1 of the air ow control board 2) X2 is required to energize aux heat during defrost Cooling with TEM6 or Variable Speed Gas Furnace...
Installation and User Guide Cooling with GAT2, GAM2 & TEM3, 4 Thermostat Indoor Unit Outdoor Unit Y/Y1 NOTES: 1) Wire third party condensate over ow switches between Y of the thermostat and Y1 of the air ow control board 2) X2 is required to energize aux heat during defrost Pub.
Trane XR202 Programmable Thermostat Installer Menu To prevent changes that may affect system performance, this thermostat has an INSTALLER MENU and a USER MENU. The INSTALLER MENU provides access to every option, while the USER MENU provides access to items that will not affect system performance.
Installation and User Guide THERMOSTAT OVERVIEW Before you begin using your thermostat, you should be familiar with its features, display and the location/operation of the thermostat buttons and switches. THERMOSTAT BUTTONS AND SWITCHES THE DISPLAY 1.) Fan Switch 10.) Thermostat is protecting the equipment from short cycling (5-minute delay) 2.) System Switch 11.) Indicates that the system is running in cool or heat 3.) Backlight Button (located on the top of the thermostat...
Trane XR202 Programmable Thermostat User Menu To customize thermostat settings, press the Menu button from the home screen. Use the buttons to highlight Settings and press Next. Use Next and Back to navigate through menu items. Press to change the setting.
For more information, please visit trane.com or tranetechnologies.com. Trane has a policy of continuous data improvement and it reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.
Need help?
Do you have a question about the XR202 and is the answer not in the manual?
Questions and answers