Installation; Identification And Structure; Ingress Protection (Ip) - Carel Heosone Technical Leaflet

ENG

3. INSTALLATION

Caution : avoid installing the controller in environments with the following characteristics:
•
relative humidity greater than 90% or with condensation;
•
strong vibrations or knocks;
•
exposure to water sprays or condensate;
•
exposure to aggressive and polluting atmospheres (e.g.: sulphur and ammonia gases, saline mist, smoke) which may cause
corrosion and/or oxidation;
•
strong magnetic and/or radio frequency interference (thus avoid installation near transmitting antennae);
•
exposure to direct sunlight and the elements in general.
3.1 Identification and structure
Heosone is identified by the rating plate located on the top of the device that shows the part number, serial number, production
date and revision.
Heosone
S/N
Input
Output
Date Rev.
Fig. 3.a

3.2 Ingress protection (IP)

Depending on the application, versions can be requested with different IPxx protection in accordance with IEC 60529-1. For UL,
all product configurations are "open type".
3.2.1 Driver with IP00 protection
Fig. 3.c shows the installation of the IP00 version. For correct arrangement of the cables, scrupulously follow the instructions
under "Cable arrangement for correct installation".
Fig. 3.c
Installation
12
1
Ref. Description
1 Electrical connection terminals
2 Heat sink
Fig. 3.b
Heosone +050002740 rel. 1.1 - 17.05.2021
2