Introduction - Samsung SIMATIC NET CP 5611 A2 Installation Instructions / Product Information

1

Introduction

CP 5611 Communications Processor A2
The CP 5611 A2 module is equipped with a PROFIBUS in-
terface up to 12 Mbps. It is intended for operation in PGs
and PCs with a PCI bus interface complying with PCI stan-
dard V2.2. The additional interface signals for the PLC
direct link (PLC – Programmable Logic Controller) are
supported up to 187.5 Kbps.
Purpose of the Installation Instructions/Product Infor-
mation Bulletin
This installation description/product information bulletin
supports you when installing the CP 5611 A2 communica-
tions processor in your PG/PC and informs you of the
properties of the product.
Validity of these Installation Instructions
This document is valid for the following hardware versions
of the CP 5611 A2:
Designation
CP 5611 A2
42
Installation Instructions CP 5611 A2
Hardware Version
as of version 1
Installation Instructions CP 5611 A2
A5E00469482-01