Page 2
Triad loudspeakers. At Triad we build only fully engineered loudspeakers with sealed back-boxes. We believe you will enjoy the rich natural music in the rooms you have...
Table of Contents Triad Installation Guide: Page: InWall Speaker Specification Chart New Construction Bracket Installation Retro-fit Installation Volume Control Wiring Diagram: Satellites & Subwoofer Volume Control Wiring Diagram: Satellites Only InWall Bronze Center Mounting Options Warranty and Dealer Information...
Wire Strippers Level Pencil or Pen Supplies you'll need: Triad (NCB) New Construction Bracket Screws or Nails for attaching NCB to studs 16 inch on center studs Step One - Mark Locate the area where the speaker will be placed...
These screws will be used to hold the frame to the speaker box. Keep the screws & frame (without grill insert) close by, you'll need them soon. Attach your speaker wires to the Triad speaker enclosures wire or binding posts. Remember the red is positive and black is negative.
Page 7
Retro-fit Installation Step Three - Attachment With the speaker wires attached, place the box inside the wall cavity and slide the retro brackets out and tighten the retro screws. Please note: when placing a 4 inch box into a 6 inch wall the box will have a tendency to want to fall backwards into the wall.
From the volume control, "Y" the speaker wires so that one set goes to the Satellites, and the other set goes to the Triad PowerSub amplifier through a converter. You may only "Y" one channel if you wish to limit deep bass...
Volume Control Wiring Diagram: Satellites Only AMPLIFIER Volume Control LEFT RIGHT – + – + With Triad Satellites VOLUME CONTROL TRIAD SATELLITES Notes:...
Page 11
If for some reason service becomes necessary, please keep this book and the sales slip together in a safe place for future reference. Triad products are warranted to be free from Speaker Model:...
Need help?
Do you have a question about the InWall Bronze Satellite and is the answer not in the manual?
Questions and answers