Signal Status Of The Enable Signal; Read Back Function For Outputs - Siemens SIMOTION TM15 Commissioning Manual

Terminal modules

Hide thumbs Also See for SIMOTION TM15:

Table of Contents

2.3.3

Signal status of the enable signal

If required, the user program can read the signal state of the enable signal using the

assigned input address. The binary value reflects the logic state for T

Example

In the example, DI 13 on the TM17 High Feature terminal module is used as the channel for

the enable signal. The input address for DI 13 is "288" plus an offset of "2.5". Consequently,

the input address used to read the signal state of the enable signal is 290.5.

The user program can read back the signal state of each output channel on the TM15 or

TM17 High Feature Terminal Modules using the assigned input address. The digital value

reflects the signal state for T

Example

In the present example, the actual signal state of DO 1 on the TM17 High Feature Terminal

Module is to be read back.

The input address for reading back DO 1 is "288" plus an offset of "3.1". Consequently, the

input address for reading back the signal state of DO 1 is "291.1".

Note

If an inverted output channel is parameterized, the inverted terminal status is read during the

read-back.

Simotion tm17