Advertisement
3
Installing and Routing the Power Cables – DC Power Supply
a
Installing the Input Power Cable for the TMC11H Cabinet
NOTE
If the input power cables delivered are the blue and black ones,
connect the blue one to the negative terminal and the black one
to the positive terminal.
b
Installing the Power Cables for the RTN 900 in the TMC11H Cabinet
1
Remove the cover of
the DC power box.
DC power
box cover
Put back the cover of the DC power box.
3
1
NOTE
You can select from DC power output terminals
LOAD6, LOAD7, and LOAD8. For information
about assembling the easy power receptacle
(pressfit type) connector, see the "Appendixes."
27
26
2
Install the input power cable.
NEG (-)
RTN (+)
Advertisement
