ABB HT569793 Operation Manual page 77

Operation Manual / 4 Product description / TPS44-H.. - TPS52-H..
9 Dismantling and fitting / 9.1 Introduction
9.1.1 Customer spare part set (97070)
The customer spare part set (97070) is required for the operations described. These parts
are only available in a complete set (see chapter
the set can be viewed via the following QR code or URL link.
http://www.abb.com/abblibrary/DownloadCenter/?CategoryID=9AAC179494&View=Result&Docu-
mentKind=Catalogue&QueryText=spare+parts+set&SortBy=Score&CountryCode=CH&Addition-
alLanguage=*
Identification of the assembly devices
Not all assembly devices are marked with a part number. Identification is guaranteed by the
tool list. This list is enclosed with the toolbox.
WARNING
Servicing the assembly devices
Assembly devices must be checked for damage before and after use.
Visually inspect for corrosion, cracks, deformation and wear.
u
Damaged assembly devices must no longer be used and must be re-
u
placed.
Tightening torques for assembly devices
Unless described otherwise, the screws and nuts of the assembly devices supplied by ABB
must be tightened so they rest firmly against the surface.
© Copyright 2017 ABB. All rights reserved.
Ordering spare parts
HZTL4037_EN
→75). The content of
Revision E July 2017