Moving The Power Supply - HP Kayak XA-s02 Install Manual

HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Minitower PC
Workstation

Moving the Power Supply

Moving the Power Supply
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (see page 3).
3 Remove the fan connection to the system board.
Fan connection to
system board
HP UltraFlow
Airflow Guide
Retaining
button
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
5 Unscrew the four self-retaining screws at the back of the power
supply.
Unscrew the
self-retaining screws
6 English