Viewing The Software Settings - HP Kayak XA Online Manual

Using Sound on Your PC
Sound Board Settings

Viewing the Software Settings

All of the sound board settings are software configurable. There are no jumpers to
set on the board. Plug and Play means you should never experience a conflict with
the sound board settings.
Viewing the Software
You can view settings through the Device Manager, as follows:
Settings Under
1 Click the Start button and select Settings
Windows 95
2 Open System
3 In the list of devices, expand the line
4 Click the Resources tab.
CAUTION As many applications are designed to work with your sound board's default settings,
you are advised not to change the board's settings unless you are very familiar with
PC configuration.
5 To change a setting, first clear the checkbox
6 Select a new setting using the scroll buttons and click OK.
7 Click OK again at the Properties window, and then click Yes at the confirmation
8 Click Close at the System Properties window. If you changed any settings, restart
Viewing the Software
You can view the software settings as follows:
Settings Under
1 Click the Start button and select Settings
Windows NT 4.0
2 Open Multimedia
3 In the list of devices, expand the line
4 The 16-bit Sound Card Properties window appears. Click Settings.
28
and click on the Device Manager tab.
will see the audio driver
Now you can view the settings. You may need to scroll the list to see all of the
settings.
select the resource type and click Change Settings.
message (but please read the message first!).
your PC for the changes to take effect.
Audio for 16-bit Sound Card
English
Control Panel.
Sound, video and game controllers
. Select this and click Properties.
HP Audio Device
Use automatic settings
Control Panel.
and click on the Devices tab.
Audio Devices
. Select this and click Properties.
. Then
. You will see the audio driver
. You