Toro Groundsmaster 4500-D Setup Instructions

Groundsmaster
Groundsmaster Traction Unit
Model No. 30856—Serial No. 270000401 and Up
Model No. 30868—Serial No. 270000401 and Up
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Note: Use this chart as a checklist to ensure that all parts necessary for assembly have been received. Without these parts,
total setup cannot be completed. Some parts may have already been assembled at the factory.
Description
Lock bracket
Screw 1/4–20 x 1/2"
Washer .281 x .625
Lock nut 1/4–20
Lift latch
Latch bracket –R.H.
Latch bracket –L.H.
Flange lock nut 1/4–20
EEC decals
EEC certificate
Installing the Hood Latch
1. Unhook the hood latch from the hood latch bracket
(Fig. 1).
2. Slide the hood lock bracket onto the latch (Fig. 1).
3. Hook the latch onto the hood latch bracket (Fig. 1).
4. Insert a bolt (1/4 x 1-1/2 in.) through the hood lock
bracket and secure it with a flat washer and locknut
(Fig. 1).
W 2007 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
)
4500-D and 4700–D
CE Compliance Set Up Instructions
Qty. Use
1
1
Install on hood latch for CE compliance
1
1
1
1
Install on control console for CE compliance
1
2
2 Apply to machine for CE compliance.
2
3
1. Hood latch
2. Hood latch bracket
1
Form No. 3358–103 Rev. A
2
Figure 1
3. Hood lock bracket
All Rights Reserved
Printed in the USA
1