HP Compaq Presario,Presario 6370 Supplementary Manual page 3

3. Connect audio cable: To have sound come from
your TV and not from your computer, plug an
audio cable into the Audio input jack (Line In) on
the TV and then plug the other end into the Line
Out jack (lime green connector) on the back of the
computer.
Viewing the
Computer Image on TV
IMPORTANT: The type of video card on your
computer determines how the computer selects
the TV-out option. Some options and menus in
this procedure may be different for your
computer.
To view your computer image on the TV:
1. Make sure the video and audio cables are
connected before you turn on the TV and the
computer.
2. Turn on the TV. Press the Video/TV button on your
remote control to select the Video setting, not the
TV setting.
Connecting the Computer to a Television
3. Turn on the computer.
4. When the Windows desktop appears, right-click
an empty area of the desktop.
5. Click Properties.
6. Click the Settings tab.
7. Click the Advanced button.
8. Click the nView tab, if available, and
under nView Modes select Clone to view the
computer image on your monitor and your TV
simultaneously.
IMPORTANT: You can view the computer
image on just the TV. Under nView Modes
select Standard [nView disabled], click
the Device Settings button, choose Select
Output Device, and then select the TV
option.
9. Click the OK button, and then click OK again.
10. When the computer image appears on the TV
screen, click Yes to keep the setting. You have
15 seconds to accept this new setting before it
reverts to the previous setting.
3