Canon ColorPASS-Z5000 Printing Manual page 99

A
A-9 Print Options
Option and settings:
(Default setting is underlined)
Paper Source
AutoSelect/Drawer 1/Drawer 2/Paper
Deck-K1/ Paper Deck-J1/ SB (Stack
Bypass)/ SB-Size Set at Copier
Paper Source Alignment
Disable/Enable
PowerForm
On/Off
Pure Black Text/Graphics
Printer's default/Off/On
Description:
Specify the paper tray to use for your job. The
Select Enable to align the paper source
drawers of the copier for accurate duplex
printing
Select when printing PowerPoint files
On
to the ColorPASS.
Select to print black text and graphics
Off
as a four color black using C, M, Y, and K
toner, and to use normal PostScript
rendering.
Select to print black text and graphics
On
as a one color black, using 100% black
toner only.
Requirements, constraints,
and information:
setting automatically
AutoSelect
selects the drawer containing the paper
size specified for the job.
The option cannot be set
Paper Deck-J1
until it is installed.
For information on configuring the Paper
Deck-J1 as an installable option, see
Getting Started.
See page A-19 for more information.
If you select , the Paper Source
Enable
option cannot be set to
AutoSelect
, or the Media Type
SB-Size Set at Copier
option cannot be set to
Custom Paper
.
Size
See the Job Management Guide for more
information.
Setting the PowerForm option to
reduce the processing time for
PowerPoint print jobs.
To enable this option, the following
options must be applied:
Compression to
Off
Combined Separations to
Off
Use Master to
None
Create Master to
None
This option is available from the
Windows NT 4.0 printer driver only.
The setting reflects the
Printer's default
setting specified in ColorPASS Setup.
For Windows 95/98 and Windows NT
4.0, choose as the Print
Expert Color
Mode to access this option.
The Combined Separations option must
be set to . This option is automatically
Off
set to if the Black Overprint option is
On
set to .
On
For more information, see the Color
Guide.
or
can
On