Canon PIXMA MX340 Series Getting Started page 45

6
Select WPS, then press the OK button.
The WPS screen is displayed.
7
Select Push button method, then press the OK button.
The When the access point is ready, press [OK] of the device. screen is displayed.
• To use the PIN code method for setup, select PIN code method in
screen instructions to operate the machine and access point. When the screen in
When the screen in appears, press the COPY button to return to the copy standby screen.
A timeout error occurs if setup is not completed within 10 minutes. If the timeout error screen appears, press the
OK button, then perform the setup again and set the new PIN code displayed on the screen to the access point. If
another error appears, refer to the printed manual: Network Setup Troubleshooting.
, then press the OK button. Follow the on-
appears, press the OK button.
10 Set Up a Wireless Connection