Meterk Z1J-GW20-13 Translation Of The Original Instructions
  1. Manuals
  2. Brands
  3. Meterk Manuals
  4. Drill
  5. Z1J-GW20-13
  6. Translation of the original instructions

Meterk Z1J-GW20-13 Translation Of The Original Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPACT DRILL
Translation of the original instructions
US
IMPACT DRILL
Z1J-GW20-13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z1J-GW20-13 and is the answer not in the manual?

Questions and answers

Summary of Contents for Meterk Z1J-GW20-13

  • Page 1 IMPACT DRILL Translation of the original instructions IMPACT DRILL Z1J-GW20-13...

  • Page 4: Proper Usage

    1. Proper usage your mains-operated (corded) power tool or battery-operated (cordless) power tool. The machine is intended for impact drilling in 1) Work area safety brick, concrete and stone as well as for drilling in wood, metal and plastic. Machines with a) Keep work area clean and well lit.
  • Page 5 ensure these are connected and use reduces the risk of electric shock. properly used. Use of dust collection can f) If operating a power tool in a damp location reduce dust-related hazards. is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD 4) Power tool use and care reduces the risk of electric shock.

  • Page 6: Special Safety Instructions

    • Secure the workpiece. A workpiece clamped intended could result in a hazardous situation. with clamping devices or in a vice is held 5) Service more secure than by hand. a) Have your power tool serviced by a qualified • Keep your workplace clean. Blends of materials repair person using only identical replacement are particularly dangerous.

  • Page 7: Description Of Symbols

    5. Description of symbols 6. Layout Pay attention to all the signs and symbols shown 1. Drill chuck in these instructions and on your tool. 2. Drill depth stop Make a note of these signs and symbols. If you 3. Drill/hammer drill selector switch interpret the signs and symbols correctly, your 4.

  • Page 8: Operation

    7.2 Fitting and adjusting the depth stop To switch off: (Fig. 4/Item 2) Press the ON/OFF switch (5) briefly. The depth stop (2) is held in place by the 8.2 Adjusting the speed (Fig. 6/Item 5) additional handle (8) by clamping. The clamp can be released and tightened by turning the handle.

  • Page 9: Technical Data

    8.5 Drill / hammer drill selector switch bit has passed through the tiles. (Fig. 7-8/Item 3) 10. Technical data Change switch position only when the drill is at a standstill! Mains voltage: 120 V ~/60 Hz Drill Power input: 7.5 A Drill / hammer drill selector switch (3) in the drill Idling speed: 0-2800 RPM...

  • Page 10: Cleaning And Maintenance

    13. Environmental protection The vibration value changes according to the area of application of the electric tool and may exceed the specified value in exceptional circumstances. End of life electrical equipment must not be placed in household waste. 11. Cleaning and maintenance Please take it to a return point.
  • Page 11 Importer name:FISHING KING, SLU Importer address: PIEDRABUENA, 4,4B, MADRID MADRID, 28026 Spain Manufacturer name: Shenzhen TOMTOP Technology Co., Ltd. Manufacturer address:G-4 Zone 5/F, No.1 Exchange Square, Huanan City, Pinghu Town, Longgang District, Shenzhen, Guangdong,China MADE IN CHINA...

Table of Contents