Step 1 - Pre-Flight Checklist; Step 2 - Choosing A Location; Step 3 - Driving Mode - Sharper Image Drone Air Racer Manual

OPERATING DRONE
Step 1 – Pre-Flight Checklist
• Read all warnings and instructions.
• Install remote batteries, page 2.
• Charge batteries, page 3.
• Make sure that drone and remote are powered off.
Step 2 – Choosing a location
• Drone is designed to be flown/driven indoors and outdoors.
• Always make sure you have enough space to fly drone.
• Always follow warnings, page 1.
Step 3 – Driving Mode
1. Turn the drone and remote on then place the drone on a hard
flat surface and allow to sit for 4 seconds.
Printed in China.
Drone Air Racer
5 FEET
2. Pair remote to drone:
Bring the Throttle all the
way up then bring it all
the way down, remote
will beep once paired.
Note: After pair is successful, keep the throttle down all the
way, to enter driving mode.
After pair is successful, you can enter flying mode by
following step 4 (shown below)
Step 4 – Lift Off
1. Bring the car to a stop.
2. Slowly and carefully press the Throttle
Joystick up. Drone will begin to elevate.
You can compensate for some of the
drone's drifting by using the Multi
Directional Button or by following step 5.
You may need to practice this step
several times before successfully getting
drone into the air.
3. Use the Multi Directional
Joystick to move
forwards, backwards or
turn left and right.
5