Basic Setup; Installation; Uninstallation; Starting Hmi500 - ABB REB500 Operation Manual

Section 3
HMI500
3.3
3.3.1
3.3.2
3.3.3
10

Basic setup

Installation

The human-machine interface program HMI500 is supplied on an installation CD.
It can be installed on Windows XP or Windows 7.
Insert the CD-ROM in the drive. The CD Navigator starts then automatically.
Should the auto-start function on your PC be disabled, select and run the program
autostart.exe on the CD to start the CD-Navigator.
Select the preferred language and enter the HMI500 link which is placed under the
section "IED Software". The software installation procedure should start now.
During this installation procedure you are requested to read and confirm your
acceptance of the license conditions.
The installation program proposes an installation directory. Either confirm the
proposed directory or enter a desired one. Make sure that you have appropriate
access rights to the respective directory. Clicking "Next" starts the installation.
An HMI500 directory and program icon "HMI500 x.xx ll" are created in the
Windows Start menu, x.xx signifying the program version and ll the language.

Uninstallation

To uninstall HMI500 open the Windows control panel and select "Add/remove
programs". In the list of programs select the entry for HMI500 and click on OK to
remove the program.

Starting HMI500

The program screens in this section are based on a typical
application. Depending on the power system configuration and the
options configured while engineering your system, certain menus
may be missing or the display appears different.
The first screen to appear after starting the operator program is the "System login"
dialog:
1MRK 500 124-UEN
Operation Manual
Distributed busbar protection REB500