Table of Contents
Advertisement
REMOVING THE PURIFIER PLATE & ACTIVEPURE
CAUTION
WARNING
NOTE:
Use genuine Aerus replacement parts only. Parts from anyone other than Aerus may damage your unit and void your
warranty.
1.
To remove the Purification
Plate, grasp edge of plate in
the center and gently pull out.
.
If the plate is difficult to
NOTE:
remove, gently press
down on the lower metal
contact tab.
4.
Remove two
(2) thumbscrews.
12
Do not look directly at the glowing lamp. Prolonged exposure, even to reflected UV light, can cause eye
damage according to the American Conference of Governmental Industrial Hygienists (ACGIH) Standards.
• Unplug the unit before performing any maintenance procedures
• Do not operate the Aerus® Pure & Clean+ without the Filter Assembly and Back Cover properly installed
2.
5.
Unlock the ActivePure® Cell
connector by pressing on the
connector's locking tabs.
Slide the ActivePure® Cell
down and out of unit.
CELL
®
3.
Pull the connector
straight out to unplug.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Pure & Clean Plus A1041A and is the answer not in the manual?
Questions and answers
the plate that produces the clean smell gave out in 90 days is this normal