Table of Contents
Advertisement
Uploading your Videos Using an Eye-Fi Card
If you are using an Eye-Fi card, you can automatically upload movies to
your favorite video sharing Web site. You will need to have installed the
software supplied with your Eye-Fi card and completed all the required
configuration setup in advance. Refer to the instruction manual of the
Eye-Fi card. Also, note that not all Eye-Fi cards can upload AVCHD
movies. Check compatibility in advance.
Please read the IMPORTANT section before using an Eye-Fi card.
Operating modes:
1 Insert your Eye-Fi card into the memory card slot and make sure
there is sufficient available space on the memory card.
For MP4 movies, step 2 is not necessary. If you are within the range of
a configured network, Web upload will start automatically.
2 Convert the desired movies (A 142).
• If you are within the range of a configured network, Web upload will
start automatically.
• The status of the wireless communication is shown by the Eye-Fi
icon as follows:
- • (grayed out) Communication not established
- • (white, flashing) Connecting; • (white, continuously on)
Wireless upload on standby
- • (animated) Wireless upload in progress
- ... [Eye-Fi Communication] is set to [j Off]
- ‰ Wireless upload stopped by the camcorder (
- ‹ Error reading from the Eye-Fi card (
IMPORTANT
Using an Eye-Fi Card
• This product is not guaranteed to support Eye-Fi card functions (includ-
ing wireless transfer). In case of an issue with an Eye-Fi card, please
check with the card manufacturer. Also note that an approval is required
to use Eye-Fi cards in many countries or regions. Without approval, use
of the card is not permitted. If it is unclear whether the card has been
approved for use in the area, please check with the card manufacturer.
146
External Connections
A
192)
A
191)
Advertisement
Table of Contents
