Remote Control Shooting - Canon EOS Rebel T1i Instruction Manual

Remote Control Shooting

Remote Controller RC-6/RC-1/RC-5 (Sold separately)
Remote controllers to shoot wirelessly up to about 5 meters/16.4 feet
from the camera. The RC-6/RC-1 can trip the shutter immediately or
after a 2-sec. delay, and the RC-5 trips the shutter after a 2-sec. delay.
RC-1 RC-6/RC-5
Set the drive mode to <Q> (p.55).
Point the remote controller toward the camera's remote control
sensor and press the transmit button.
The camera will autofocus.
When focus is achieved, the self-timer lamp will light and the picture
will be taken.
Camera misoperation may occur near certain types of fluorescent lights.
During wireless remote control, try to keep the camera away from
fluorescent light.
Remote Switch RS-60E3 (Sold separately)
Remote switch with a 60 cm/2.0 feet cord for pressing the shutter button
halfway or completely. It connects to the camera's remote control terminal.
194
Remote control sensor