Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Beko B3D510644UW
Summary of Contents for Beko B3D510644UW
- Page 1 Washer-Dryer User Manual B3D510644UW 2820529782/ EN/ / 22/11/2021 14:41...
-
Page 2: Table Of Contents
Tips for Efficient Washing.... 22 9 DISCLAIMER / WARNING....50 Tips for Efficient Drying ....23 5.10 Displayed Programme Duration .. 23 BEKO UK AND IRELAND STAND- ARD MANUFACTURER GUAR- 6 Operating the Product ....24 ANTEE TERMS AND CONDI- Control Panel....... - Page 3 Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
-
Page 4: Safety Instructions
1 Safety Instructions This section includes the safety • The manufacturer assumes instructions necessary to pre- no responsibility for any dam- vent the risk of personal injury age due to misuse or mis- or material damage. handling. • This appliance is intended to Our company shall not be held be used in household and responsible for damages that... -
Page 5: Electrical Safety
• Children under the age of 3 Electrical Safety should be kept away unless • Product should be unplugged continuously supervised. during installation, mainten- • Electrical products are dan- ance, cleaning and repair gerous for children and pets. procedures. Children or pets should not •... -
Page 6: Handling Safety
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not structions to prepare the wet, dirty or dusty. product for installation and Handling Safety make sure the electrical... - Page 7 • Place the product on a level erly. If the water pressure is and hard surface and balance above 1 MPa (10 Bars), a with the adjustable legs. pressure-reducing valve • Connect the product to a should be fitted. The max- grounding plug protected by a imum allowed temperature is fuse suitable to the current...
-
Page 8: Operational Safety
of the device igniting other working Contact of the deter- fuels in the room or interact- gent with your skin and eyes ing with an open flame. is dangerous. • Make sure pets do not climb Operational Safety inside the product. Check in- side the product before use. -
Page 9: Drying Safety
draining hose is connected to hol, gasoline, gas oil, stain re- the tap. Do not touch the dis- movers, naphtha, turpentine, charge water. paraffin or paraffin removers • Take the following precau- should be washed separately tions to prevent formation of in hot water by adding extra biofilm and malodours: detergent before being dried... - Page 10 ated inside of the door glass. • If the laundry has been There is a risk of burns due to washed with a stain remover, high temperatures. run an additional rinsing • During Drying programmes, a speed before starting the dry- cooling step is performed as ing speed.
-
Page 11: Maintenance And Cleaning Safety
• Lingerie that has metal parts reason, the water tap of the should not be dried in the ma- machine should also be open chine. Metal parts may come during drying programmes. off during drying and cause • Prevent the lint from accumu- damage to the machine. -
Page 12: Important Instructions For Environment
2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manu- factured with high quality parts and materi- als which can be reused and are suitable for recycling. -
Page 13: Technical Specifications
3 Technical Specifications Supplier’s name or commercial brand Beko B3D510644UW Model name 7178541900 Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet... -
Page 14: Installation
4 Installation • Prior to installation, visually check if the Please read the “Safety Instruc- product has any defects on it. Do not tions” section first! have the product installed if it is dam- aged. Damaged products cause risks for While performing the installation of your safety. -
Page 15: Removing Transportation Safety Bolts
Cover A 4.4 Connecting to Water Supply WARNING The water pressure required for the operation of the product is between 1-10 bars (0.1-1 MPa). To ensure a smooth operation of the machine, 10 - 80 liters of water shall be sup- plied in a minute from a fully Tilt the machine back slightly. -
Page 16: Connecting The Drain Hose To The Drain
d. To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. -
Page 17: Electrical Connection
4.7 Electrical Connection c. Connect the brown (live) wire to the ter- minal in the plug marked ‘L’ or coloured Connect the product to a grounded outlet red. protected by a 13 A fuse. Our company With the alternative plugs a 13 A fuse must shall not be responsible for the damages be fitted either in the plug or adaptor or in that shall be incurred due to using the... -
Page 18: Preparation
5 Preparation • Wash trousers and delicate laundry Please read the “Safety Instruc- turned inside out. tions” section first • Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. 5.1 Sorting the Laundry intensely must be shaken off before pla- •... -
Page 19: Loading The Laundry
apply the method which is described in sec- Follow the instructions in “Pro- tion "Cleaning the loading door and the gramme and consumption table”. drum". When the appliances is overloaded product’s washing performance will drop. Moreover, noise and vibration problems may occur. For a successful drying perform- ance, do not put more laundry in the machine than specified. - Page 20 • Do not add washing chemicals (Liquid detergent, Softener, etc.) while the ma- chine is during Drying step. Choosing the Detergent type Detergent type to be used depends on the washing programme, fabric type and col- our. • Use different detergents for coloured and white laundry.
- Page 21 • If the softener is not fluid, dilute with wa- • Tablet detergents may leave residue in ter before placing in the softener com- the detergent compartment. If you face partment. such residues, place the tablet detergent among the laundry in the next washes in WARNING a way that it will be at the bottom side of Do not use liquid detergents or...
-
Page 22: Tips For Efficient Washing
Add the decolourant to the same com- partment while the machine continues taking in water. 5.8 Tips for Efficient Washing Clothes Light Colours and Black/Dark Col- Delicates/ Wool- Colours Whites ours lens/Silks (Recommended (Recommended (Recommended temperat- (Recommended temper- temperature temperature range ure range based on soil ature range based on range based on... -
Page 23: Tips For Efficient Drying
5.9 Tips for Efficient Drying Programmes Synthetic Dry- Washing and Clean and Cotton Drying Babyprotect+ Drying Wear It washes and It washes and Clothes such Sheets, bed- dries consecut- dries consecut- as shirts, t- dings, baby ively! Sheets, ively! Sheets, shirts, sweat- clothes, t- beddings, baby... -
Page 24: Operating The Product
6 Operating the Product Please read the “Safety Instruc- tions” section first! 6.1 Control Panel 1 Programme Selection Button 2 Temperature Level Lights 3 Spin Level Indicator Lights 4 Display 5 Start/Pause Button 6 Remote Control Button 7 End Time Setting Button 8 Drying Level Adjustment Button 9 Auxiliary Function Button 2 10 Auxiliary Function Button1... -
Page 25: Symbols On The Display
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Drying Level Indicator 12 Child Lock Enabled symbol... -
Page 26: Selection Of Washing Program
6.4 Selection of Washing Program Symbols shown on the display are schematic and may not match with a. Determine the programme suitable for the product one-to-one. the type, quantity and soiling level of the If you do not want to perform drying laundry in accordance with "Programme process after the programme you and consumption table". - Page 27 • Cottons applied at the end of the programme re- duce the wrinkles on your shirts. When the You can wash your durable cotton laundry quick wash function is selected, the Pre- (sheets, bedlinen, towels, bathrobes, un- treatment algorithm is executed. derwear etc.) in this programme.
-
Page 28: Temperature Selection
• Sports Temperature Adjustment button You can use this programme to wash only works backwards. For ex- sports and outdoors garments that contain ample, if you want to select 60°C cotton/synthetics mix and water repellent while 40°C is written on the display, covers such as gore-tex etc. -
Page 29: Drying Programmes
Spin Speed Adjustment button only In programmes that do not allow works backwards. For example, if the drying setting, when the Drying you want to select 1000 rpm while auxiliary function button is pressed, 800 rpm (cycle/min) is written on the drying light will not change and the display, you need to press the a warning noise will be heard. -
Page 30: Washing And Drying Programmes
• Cotton Dry Clean and Wear programme is de- Use this programme to dry cotton laundry signed to quickly wash and dry with a dry weight of up to 6 kilograms. You daily clothes that have been worn can only dry in this program. for a short time and are not heavily contaminated. -
Page 31: Programme And Consumption Table
Refreshing with hot air (48 min. and 38 The default duration is 58 minutes if you min..) select the “Hygienic Ventilation” pro- gramme. With “Fast+” auxiliary function you can select different programme durations such as 48 minutes and 38 minutes. 6.10 Programme and Consumption Table For washing: Auxiliary Functions... - Page 32 - : See the programme description for max- You can see the washing duration imum load. on the display of your machine while selecting a programme. De- Please read Installation section of pending on the amount of laundry the manual before first use. you have loaded into your machine, The auxiliary functions in the table there may be a difference of 1-1.5...
-
Page 33: Auxiliary Function Selection
Wash & Wear 0,60 1200 • • 30-Cold Wash & Wear 1,00 1200 • • 30-Cold HygieneTherapy 0,50 • • Consumption Values (EN) Energy Temperat- Programme Water Con- Laundry Residual Spin Speed Capacity Consump- ure Selec- Duration sumption Temperat- Moisture (cycle/min) (kg) tion (kWh/... -
Page 34: Auxiliary Functions
• Customized Programme If the selected wetness level (Iron Dry, Cupboard Dry, Cupboard Ex- This auxiliary function can only be used for Cotton and Synthetics programmes to- tra Dry) cannot be reached at the gether with the HomeWhiz application. end of the drying programme, your When this auxiliary function is activated, machine automatically extends the you can add up to 4 auxiliary rinsing steps... - Page 35 This is not a washing programme. You can switch on and off the ma- This is a maintenance programme. chine with On / Off button when the Do not turn this programme on Child Lock is active. When you when there is something inside the switch on the machine again, pro- machine.
-
Page 36: Drying Steps
If the laundry is not at the desired dryness First setup of the HomeWhiz applic- level at the end of the drying programme, ation must be complete for the timed drying can be selected to finish the bluetooth connection to be activ- process. -
Page 37: Starting The Programme
6.14 Starting the Programme If you want to cancel End Time function, press On/Off button to turn off and on the machine. a. Start the programme by pressing the Start/Pause button. When you have activated the End b. The flashing light of Start/Pause button Time function, do not add liquid de- starts to illuminate steadily, indicating tergent in the powder detergent... -
Page 38: Changing The Selections After Programme Has Started
If the water level in the machine is not suit- able when you press Start/Pause button, the door lock cannot be deactivated and the door lock icon on the display remains c. Pull down the loading door emergency If the temperature of the water in- handle with a tool and release. -
Page 39: Cancelling The Programme
programme is over, the machine automatic- The loading door will not open if the ally switches to energy saving mode. Fur- water temperature in the machine thermore, if your product has a display that is high or the water level is above shows the programme time, this display is the loading door baseline. -
Page 40: Homewhiz Setup
Control Function button simultaneously In order to use the HomeWhiz func- for 3 seconds to switch your machine to tion, the application must be in- HomeWhiz setup mode. stalled on your smart appliance, and your washing machine must be paired with your smart appliance via Bluetooth. -
Page 41: Setting Up A Washing Machine Connected To Someone Else's Account
6.20.2 Setting up a Washing Your washing machine will auto- Machine Connected to matically turn off if you cannot real- ize the setup successfully within 5 Someone Else's Account minutes. In this case, you have to If the washing machine that you want to start the setup process all over use has been previously registered to the again. -
Page 42: Troubleshooting
If the Remote Control function is Off, all the WARNING operations are handled on the washing ma- If the Bluetooth connection is chine and only status follow-up is allowed turned on in your product, then the on the application. Remote Control function can be se- In the event that Remote Start function can- lected. -
Page 43: Maintenance And Cleaning
7 Maintenance and Cleaning Please read the “Safety Instruc- tions” section first! Service life of your product extends and fre- quently experienced problems will be re- duced if it is cleaned at regular intervals. 7.1 Cleaning the Detergent Drawer After every washing make sure that no for- Clean the detergent drawer at regular inter- eign substance is left in the product. -
Page 44: Draining Remaining Water And Cleaning The Pump Filter
NOTICE: Foreign substances left in the pump filter may damage your product or may cause noise problem. In regions where freezing is pos- sible, the tap must be closed, sys- tem hose must be removed and the water inside the product must be drained when the product is not in a. -
Page 45: Troubleshooting
• Completely turn and remove the pump fil- b. Replace the filter. ter when the water in the product leaks c. If the filter cap is composed of two out. pieces, close the filter cap by pressing a. Clean any residues inside the filter as on the tab. - Page 46 Product directly drains the water it takes • Excessive foam has occurred and auto- matic foam absorption system has been activated due to too much detergent us- • Draining hose is not at adequate height. age. >>> Use recommended amount of >>>...
- Page 47 Washing performance is poor: Laundry Washing performance is poor: Oily turns gray. (**) stains appeared on the laundry. (**) • Insufficient amount of detergent has been • Regular drum cleaning is not applied. used over a long period of time. >>> Use >>>...
- Page 48 the laundry to become stiff in time. Use • Detergent was mixed with the softener. appropriate amount of detergent accord- >>> Do not mix the softener with deter- ing to the water hardness. gent. Wash and clean the drawer with hot •...
- Page 49 table”. When you use additional chemic- Laundry shrinks, fades, tarnishes or als (stain removers, bleaches and etc.), gets damaged. reduce the amount of detergent. • The programme selected might not be suitable for the type of laundry. >>> Laundry remains wet at the end of the Check the care labels on clothes and se- programme.
-
Page 50: Disclaimer / Warning
Some (simple) failures can be adequately port.beko.com , might give raise to safety handled by the end-user without any safety issues not attributable to Beko , and will issue or unsafe use arising, provided that void the warranty of the product. -
Page 51: Beko Uk And Ireland Stand
If you have purchased an American style Fridge freezer, the standard guarantee starts from the date of ori- ginal purchase of the product, and lasts for a period of twenty four (24) months unless Beko plc (the “Manu- facturer”) agrees to extend the guarantee for the product in writing. - Page 52 11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Beko offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replace- ment is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
-
Page 53: Antee Terms And Condi
In order to activate the 10 year guarantee you MUST register the appliance within 90 days of the original purchase date. You can register by first visiting Beko.co.uk/register and by following the online instruc- tions. - Page 54 Further details are available at http://www.beko.co.uk/cookie-and-privacy. 13. These Terms and Conditions are governed by the laws of England and Wales; manu- facturer: Beko plc, Beko House, 1 Greenhill Crescent, Watford WD18 8QU. Company Registration Number: 02415578. HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE Please keep your purchase receipt or other proof of purchase details in a safe place;...
- Page 55 Contact Us and choose a product support topic from the list of options. Complete the required details and click send message. Product registrations For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register. EN / 55...