Bright: The line beam is brighter in this mode.
Normal: Brightness is between the Eco and Bright modes.
This is the optimum mode when using the receiver.
Eco:
Battery life lasts longer in this mode.
1
1: Brightness indicator
4. Line beam mode selection
Select the line beam emission mode by the line selection switch on the operation panel.
When the power is turned ON, the product emits the laser beam in the same mode of
that was turned OFF last time.
SK312GD
[Loopback switch system]
Bright
Mode
Brightness
indicator
Line selection switch
Lower dot beam
19 ENGLISH
[Loopback switch system]
Bright
Normal
Red
LED out
LED lit
Eco
Green
LED lit
Lower dot beam