SPINOGY X22 Operating Manual page 11

WARNING: Unauthorized staff
Unauthorized staff is unaware of the hazards in their work area. Failure to comply with the person-
nel requirement can result in serious injury or even death.
Unauthorized staff
Any person who:
• has not read this operating manual, has not read it completely or has not clearly understood it
• does not meet the qualification requirements for working at the SPINOGY X22 spindle
• has not received instructions from the operator for working at the spindle
is considered an unauthorized person.
The following points must therefore be observed in any case:
• Keep unauthorized persons away from the danger and work area
• In case of doubt, talk to persons and direct them away from the danger and working area
• Interrupt the work as long as unauthorized persons are in the danger and work area
• Deny access to unauthorized people
02.4 Responsibilities and duties of the operator
The operator himself is assumed to have the necessary qualifications and special expertise in handling machine tools and
systems. If the operator does not carry out the necessary work himself, appropriate personnel must be called in for the pro-
fessional installation, commissioning, maintenance and repair, dismantling/ decommissioning/ disposal!
In addition to the safety instructions in this manual, the country-specific safety measures, occupational health and safety
measures and environmental protection regulations etc. valid for the application range of the machine must be observed.
Furthermore, the operator is responsible for the following points:
• Ensuring that the spindle is always in a technically perfect condition
• Compliance with maintenance intervals
• Creating of operating manuals
• Creating of hazard assessments
• Training and instruction of authorized staff at regular intervals
• Ensuring that authorized persons using the spindle, have carefully read and understood the operating manual
• Equipping staff with the appropriate protective equipment
02.5 Modifications and unauthorized changes
Modifications and unauthorized changes at the spindle by the operator are only permitted after consulting SPINOGY.
If unauthorized modifications are made, the issued CE declaration of conformity loses its validity and the operator legally
becomes the machine manufacturer.
Opening and repairing the spindle may only be carried out by SPINOGY, only then proper functioning can be guaranteed.
02 SAFETY INSTRUCTIONS 11