Probe Packet-Number; Probe Packet-Timeout - HP E4510-48G Command Reference Manual

[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-interval 100

probe packet-number

Syntax
probe packet-number packet-number
undo probe packet-number
View
UDP jitter, voice test type view
Default Level
2: System level
Parameters
packet-number: Number of packets sent in a UDP jitter probe or a voice probe. For a UDP jitter test, it
is in the range 10 to 1000; for a voice test, it is in the range 10 to 60000.
Description
Use the probe packet-number command to configure the number of packets sent in a UDP jitter
probe or a voice probe.
Use the undo probe packet-number command to restore the default.
By default, the number of packets sent in a probe is 10 in a UDP jitter test and 1000 in a voice test.
Examples
# Configure the number of packets sent in a UDP jitter probe as 100.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Syaname-nqa-admin-test-udp-jitter] probe packet-number 100

probe packet-timeout

Syntax
probe packet-timeout packet-timeout
undo probe packet-timeout
View
UDP jitter, voice test type view
Default Level
2: System level
18-26