Table of Contents
Advertisement
7 Suspending connected plasma displays using wires
More than one display can be connected, as shown in the figure. (Maximum: 3 displays)
When wires are fixed to the ceiling, use two wires fixed at two independent points.
Hole (9-mm dia.)
Hole (9-mm dia.)
• To prevent plasma displays from tilting, fix them with
wires that pass through the bottom bolts.
• When more than two displays are to be hung, use
as many wires as needed to withstand the total
weight (30.8 kg <31.6 kg> for a plasma display and
3.3 kg for a PDP bracket).
• For the temperature or other conditions, see the
description
in
"Special
suspension (using wires)."
<
> shows the PDP-V402E.
Strength when special eye bolts are used
It is possible to connect three units in total using special eye bolts. Do not connect four or
more units, because there is a likely danger of wire attachments and fixtures being broken
Caution
due to excessive load.
Mounting standard metal fixtures (PDK-4005)
Hole (9-mm dia.)
Hole (9-mm dia.)
installation,
Ceiling
Hole (9-mm dia.)
Wire
87
Advertisement
Table of Contents
