Resetting The Factory Defaults - Honeywell 1602-B User Manual

Resetting the Factory Defaults

This selection erases all your settings and resets the scanner to the original factory defaults. It also disables all plugins.
If you aren't sure what programming options are in your scanner, or you've changed some options and want to restore the scan-
ner to factory default settings, first scan the Remove Custom Defaults bar code, then scan Activate Defaults. This resets the
scanner to the factory default settings.
Remove Custom Defaults
Note: Scanning the Activate Defaults bar code also causes both the scanner and the host to perform a reset and become
unlinked. You must relink (pair) the scanner to the host. See
additional information.
The Menu Commands,
isk (*) on the programming pages).
8 - 4
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
beginning on page 9-4 list the factory default settings for each of the commands (indicated by an aster-
Wireless System Operation beginning on page 3-1 for
Activate Defaults