Mercusys AC12G User Manual page 22

• Secondary Connection - It's available only for PPPoE connection. If your ISP
provides an extra connection type, select Dynamic IP or Static IP to activate the
secondary connection.
• MTU Size - The default MTU size is 1480 bytes. It is not recommended that you
change the default MTU size unless required by your ISP.
• Service Name - The service name should not be configured unless you are sure it
is necessary for your ISP. In most cases, leaving these fields blank will work.
• Access Concentrator Name - The access concentrator name should not be
configured unless you are sure it is necessary for your ISP. In most cases, leaving
these fields blank will work.
• Detect Online Interval - The router will detect Access Concentrator online at
every interval. The default value is 10. You can input the value between 0 and 120.
The value 0 means no detect.
• IP Address - The default setting is to get an IP address dynamically from your ISP.
If your ISP does not automatically assign IP addresses to the router, please select
Use the Following IP Address and enter the IP address provided by your ISP in
14
Chapter 4