Related Manuals for Duke Fitness SC50
Summary of Contents for Duke Fitness SC50
- Page 1 ASSEMBLY AND OPERATING INSTRUCTIONS max. 130 kg ~ 30 Min. 40 kg L 133 | W 51 | H 125 DUSC50.01.04 Art. No. DU-SC50 INDOOR CYCLE SC50...
- Page 2 SC50...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Assembly Adjustments 2.4.1 Adjusting the pedal belt 2.4.2 Adjust the resistance 2.4.3 Emergency brake function 2.4.4 Saddle adjustment 2.4.5 Adjusting the handlebar OPERATING INSTRUCTIONS Console Display Button Functions STORAGE AND TRANSPORT General Instructions... - Page 4 ORDERING SPARE PARTS Serial Number and Model Name Parts List Exploded Drawing WARRANTY CONTACT SC50...
- Page 5 Dear customer, Thank you for choosing a Duke Fitness brand fitness equipment. Duke Fitness offers you fitness equipment that makes it easy to start exercising regularly, stay fit and lose weight. We want to help you to achieve your fitness goals quickly and sustainably and hope that your new fitness equipment will help you to do so.
- Page 6 This notice indicates potentially hazardous situations which, if not avoided, will result in death or serious injuries! NOTICE This notice indicates further useful information. Retain these instructions in a safe place for future reference, maintenance or when ordering replacement parts. SC50...
-
Page 7: General Information
GENERAL INFORMATION Technical Data LED - Display of Time in min Speed in km/h Distance in m Calories in kcal Pulse Brake system: Magnet manual brake system Flywheel: 7 kg Weight and dimensions Article weight (gross, including packaging): 45 kg Article weight (net, without packaging): 40 kg Packaging dimensions (L x W x H):... -
Page 8: Personal Safety
Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons. ࣑ ATTENTION Do not insert any objects of any kind into the openings of the device. SC50... -
Page 9: Set-Up Place
Set-Up Place WARNING ⚠ Do not place the equipment in main corridors or escape routes. ⚠ CAUTION Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. Make sure that you leave at least 30 cm on each side of the equipment and at least 15 cm in front of and behind the equipment as a training zone. -
Page 10: Assembly
To prevent damage to the equipment and the floor, assemble the equipment on a mat or packaging board. NOTICE In order to make the assembly as simple as possible, some screws and nuts to be used can already be pre-assembled. Ideally, assemble the equipment at its later set-up place. SC50... -
Page 11: Scope Of Delivery
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. CAUTION ⚠... - Page 12 Hardware NOTICE Except for the washer no. 8 and the L-type knob no. 8, which are used for the assembly step 3, all bolts, washers and nuts are to be loosened and removed before proceeding with the assembly. SC50...
-
Page 13: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fit properly. Tighten the screws using the tool only when you are instructed to do so. Step 1: Assembly of the Rear and Front Stabilizer First, remove the bolts (14), spring washers (15) and washers (16) from the front stabilizer (45) - Page 14 Mount the saddle (21) onto the horizontal saddle tube (30) with the spanner (B). Loosen the L-type handle (20) on the main frame (38) and pull it out a little. Place the handlebar tube join (18) at the desired height and fix the position by tightening the L-type handle (20) again. SC50...
- Page 15 Step 3: Assembly of the Handlebar and Computer Holder Mount the handlebar (17) onto the handlebar tube join (18) with the L-type knob (9) and a washer (8). Loosen and remove the preassembled bolt (5), washer (6) and nut (7) on the handlebar (17). Slide the trunk wire (19) through the computer holder (2) (fig.
- Page 16 Mount the right pedal (36R) onto the right crank (89R) clockwise by using the spanner (B). Mount the left pedal (36L) onto the left crank (89L) counterclockwise by using the spanner (B). ⚠ CAUTION Make sure to screw on the pedals completely. fig. 3 SC50...
- Page 17 Step 5: Alignment of the Feet If the floor is uneven, you can stabilize the equipment by rotating the foot pads (47) under the stabilizers (45 & 48). Lift the indoor cycle on the desired side and rotate the foot pad (47). Rotate the foot pads (47) clockwise to remove it and raise the equipment.
-
Page 18: Adjustments
The stationary knob (62) is also an emergency brake. Use this safety function in any situation where you need to get off the bike or stop the indoor cycle flywheel. During exercise, press the stationary knob (62) firmly to stop the indoor cycle immediately. SC50... -
Page 19: Saddle Adjustment
2.4.4 Saddle adjustment The seat of this indoor cycle can be adjusted horizontally and vertically. To adjust the saddle (21) vertically, release and pull out the knob (37) on the main frame (35) and lift or lower the saddle to the desired height. -
Page 20: Operating Instructions
Display range 0:00 – 99:59 minutes SPEED Display of the current speed Display range 0.0 – 99.9 km/h Display of the current RPM rate Display range 0.0 - 1500 RPM DISTANCE Display of the covered distance Display range 0 – 99.9 km SC50... -
Page 21: Button Functions
CALORIES/ Display of calories TEMPERATURE Display range 0 – 999 kcal Display of the current room temperature PULSE ⚠ WARNING Your training equipment is not a medical device. The heart rate measurement of this equipment may be inaccurate. Various factors can affect the accuracy of the heart rate measurement. -
Page 22: Storage And Transport
After that, you easily can move the equipment to a new position. For long transport distances the equipment should be disassembled and safely packed. Select the new location by following the instructions in the section 1.3 of this manual. SC50... -
Page 23: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. CAUTION ⚠ Damaged or worn components may affect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 24: Maintenance And Inspection Calendar
The materials can be recycled as per their symbols. Through the reuse, recycling of materials or other forms of recovery of old equipment, you make an important contribution to the protection of the environment. SC50... -
Page 25: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more efficient and pleasant, we recommend that you add suiting accessories to your fitness equipment. This could be a floor mat, for example, which makes your fitness equipment stand more securely and also protects the floor from falling sweat, but it could also be additional handrails on some treadmills or silicone spray to keep moving parts in good shape. -
Page 26: Ordering Spare Parts
The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate field. Serial number: Brand / Category: Duke / Indoor Cycle Model Name: SC50 Article Number: DU-SC50 SC50... -
Page 27: Parts List
Parts List Name Qty. No. Name Qty. Computer Rubber Paste (2×29×19) Computer Holder Fixed Plate of Horizontal Saddle Tube Bolt (M5×20) Saddle Tube Grommet (ø12.5) 36L/R Pedal Bolt (M8×35×S5) Knob (M16) Washer (D8×ø16×1.5) Main Frame Cap Nut (M8×H16×S13) Bolt (ø7.8×30×M6×15×S5) Washer Bearing (608ZZ) L-type Knob... - Page 28 Wave Washer (D20×ø26×0.3) Nylon Nut (M6×H6×S10) Inner Cover Idler Shaft Bolt (ST4.2×8) Idler Belt Washer (D6×ø16×1.5) Spring Washer (D6) Bolt (M6×10×S10) Magnet Washer (D12) Belt Plate Magnetic Plate Axle Middle Axle Bolt (M6×45) Wrench (S5) Magnet Spanner (S13-14-15) Brake Pad (30×20×8) SC50...
-
Page 29: Exploded Drawing
Exploded Drawing... - Page 30 SC50...
-
Page 31: Warranty
WARRANTY Training equipment from Duke® is subject to strict quality control. However, if a fitness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. Error Descriptions Your fitness equipment is developed for long-term, high-quality training. - Page 32 For that reason, we also want to resolve your queries quickly and in a straightforward manner. Thus, please always keep your customer number and the serial number of the faulty equipment handy. SC50...
-
Page 33: Contact
CONTACT TECHNIK TEKNIK OG SERVICE TECHNIQUE & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 172 770033 +49 4621 4210-945 +49 4621 4210-933 �� +49 4621 4210-698 �� �� info@fitshop.dk service-france@fitshop.fr �� technik@sport-tiedje.de �� �� Åbningstider kan findes på... - Page 34 The company employs numerous sports scientists, fitness trainers and competitive athletes. Visit us also on our social media platforms or our blog! SC50...
- Page 36 INDOOR CYCLE SC50...
Need help?
Do you have a question about the SC50 and is the answer not in the manual?
Questions and answers