Cleaning; Important Safety Precautions; Materials Disposal; Eu / Declaration Of Conformity - Emfit D-1090-2G User Manual

14. CLEANING

The bed sensor can be cleaned with water and, when necessary, neutral general-purpose or mild antiseptic detergents. Always
dry the sensor after cleaning. Use a moist cloth for cleaning the control unit.
THE CONTROL UNIT MUST NOT GET WET! DO NOT CLEAN THE AC ADAPTER OR THE CONTROL UNIT WHEN IT IS
CONNECTED TO THE MAINS OUTLET. ALWAYS DRY IT WELL AFTER CLEANING.

15. IMPORTANT SAFETY PRECAUTIONS

TO AVOID POSSIBLE INJURY OR DEATH:
- READ INSTRUCTIONS PRIOR TO USE
- ALWAYS TEST THE SYSTEM PER INSTRUCTIONS PRIOR TO USE
- THIS PRODUCT MAY NOT BE SUITABLE FOR ALL PERSONS
- THIS PRODUCT SHOULD NOT BE A SUBSTITUTE FOR MAINTAINING THE ROUTINE VISUAL MONITORING PROTOCOL BY
CAREGIVER.
- MUST NOT BE USED IN SITUATIONS WHERE A DELAY IN THE ARRIVAL OF APPROPRIATE MEDICAL CARE COULD LEAD TO A
POTENTIALLY LIFE-THREATENING SITUATION.
- NEVER USE EMFIT SENSOR WITH OTHER MANUFACTURERS' DEVICES.
- THE NOTIFICATION MAY FAIL TO SOUND IF THE SENSOR OR ITS WIRE IS DAMAGED OR IMPROPERLY POSITIONED.
- PETS CAN CAUSE FALSE NOTIFICATIONS OR MAY CAUSE THE DEVICE NOT TO TRIGGER NOTIFICATION.
- SENSOR MUST NOT BE SCRATCHED, SLIT OR CUT.
- CHECK SENSOR AND WIRES CONDITION AND IN USE TIME AT LEAST WEEKLY AND REPLACE WHEN NECESSARY.
- DO NOT INTEGRATE TO OTHER SYSTEM OTHERWISE THAN SPECIFIED IN THIS MANUAL.
- TO AVOID RISK OF ELECTRICAL SHOCK, AVOID GETTING THE SENSOR SYSTEM GET WET.
- DO NOT OPEN THE PARTS OR ATTEMPT TO REPAIR IT YOURSELF.
- ALWAYS KEEP THE CONTROL UNIT AND SENSOR DRY. EXPOSURE TO EXCESSIVE MOISTURE CAN CAUSE IT TO
MALFUNCTION.
- THE PRODUCT FULLFILLS THE REQUIREMENTS OF THE EMC-DIRECTIVE FOR MEDICAL DEVICES- IT DOES NOT CAUSE ANY
ELECTROMAGNETIC DISTURBANCE IN NORMAL WORKING CONDITIONS.
- THE PRODUCT CAN BE STACKED OR PLACED NEAR OTHER PRODUCTS OR DEVICES AS LONG AS MECHANICAL VIBRATION IS
NOT PRESENT.
- ALWAYS CHECK THE FUNCTION OF THE PRODUCT AFTER MAKING ADJUSTMENTS.
ACCIDENTIAL OR INTENTIONAL ADJUSTMENT OF KNOBS AND SWITCHES BY THE USER OR SUBJECT MAY CAUSE:
- THE NOTIFICATION SOUND TO NOT ACTIVATE WHEN ADJUSTING THE VOLUME CONTROL TO THE OFF POSITION.
- FALSE NOTIFICATIONS (INCREASE) OR MALFUCTION (DECREASE) WHEN ADJUSTING THE SENSITIVITY.
- THE PRODUCT MAY NOT GIVE NOTIFICATION WHEN NECESSARY WHEN PRESSING THE ON/OFF/RESET SWITCH.
- THE PRODUCT MAY NOT GIVE NOTIFICATION WHEN NECESSARY WHEN SWITCHING DIP SWITCHES.

16. MATERIALS DISPOSAL

At the end of the product's use life, please dispose of it at appropriate collection points provided in your country.
For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance
(EIA, www.eiae.org).
In the European Union, this label indicates that this product should not be disposed of with household waste. It
should be deposited at an appropriate facility to enable recovery and recycling.

17. EU / DECLARATION OF CONFORMITY

Emfit Epileptic Seizure Alarm (device model D-1090-2G and bed sensor model L-4060SL) complies with the
essential requirements of EMC directive 2004/108/EC, CE mark directive 93/68/EEC and Medical Device Directive
93/42/EC and carries the CE marking accordingly.
10