Sony DSX-M80 Help Manual page 61

Item
LPF SLOPE (low pass filter slope)
SUBWOOFER (subwoofer)
Item
SUBW LEVEL
(subwoofer level)
SUBW PHASE
(subwoofer phase)
SUBW POS (subwoofer position)
LPF FREQ
(low pass filter frequency)
LPF SLOPE (low pass filter
slope)
HPF (high pass filter)
Item
HPF FREQ (high pass filter
frequency)
HPF SLOPE (high pass filter
slope)
AUX VOLUME (AUX volume)
Adjusts the volume level for each connected auxiliary device: [+18 dB] – [0 dB] – [-8 dB]. This setting negates the need
to adjust the volume level between sources. (Available only when the AUX is selected.)
BT AUDIO VOL (BLUETOOTH audio volume)
Adjusts the volume level for each connected BLUETOOTH device: [+6 dB] – [0 dB] – [-6 dB]. This setting negates the
need to adjust the volume level between sources.
(Available only when the BT audio, application or Pandora® is selected.)
MAX VOLUME (maximum volume)
Sets the maximum volume level of the unit: [30] – [50].
Selects the LPF slope: [1], [2], [3].
Adjusts the subwoofer volume level:
[+10 dB] – [0 dB] – [-10 dB].
([MUTE] is displayed at the lowest setting.)
Selects the subwoofer phase: [NORMAL], [REVERSE].
Selects the subwoofer position: [NEAR], [NORMAL], [FAR].
(Available only when [F/R POSITION] is not set to [OFF].)
Selects the subwoofer cut-off frequency: [50Hz], [60Hz], [80Hz], [100Hz],
[120Hz].
Selects the LPF slope: [1], [2], [3].
Selects the front/rear speaker cut-off frequency: [OFF], [50Hz], [60Hz], [80Hz],
[100Hz], [120Hz].
Selects the HPF slope (effective only when [HPF FREQ] is set to other than
[OFF]): [1], [2], [3].
61
Detail
Detail
Detail