Sealey AP45MWS Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop
‰
practice regulations are adhered to when using this product.
DO NOT open more than one drawer at a time.
8
DO NOT step on the drawers.
8
DO NOT let children play with the roll cab.
8
Ensure all drawers are fully closed and the self locking catches are
9
activated, before moving the toolbox.
Secure the brakes when rollcab is in the desired position.
9
Keep the work area clean, uncluttered and ensure there is adequate
9
lighting.
DO NOT use in damp work areas.
8
WARNING! The warnings, cautions and instructions referred to in this
‰
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are
factors which cannot be built into this product, but must be applied by the operator.
2. INTRODUCTION
AP36MWS:
Heavy-duty mobile workstation with 7 drawers and cupboard. Drawers run on 45mm ball bearing slides with a weight capacity of 40kg per
drawer. All drawers fitted with aluminium handles and 2.5mm EVA non-slip liners. Cupboard and drawers lock separately for safe storage. All
panels made of perforated steel for hook storage. Supplied with two shelves to be mounted as required. Top of workstation lined with 10mm
EVA mat. Four alloy style 5" castors, two fixed and two swivel with quick release brake. Steel handle at either end for easy mobility.
AP45MWS:
Heavy-duty mobile workstation with 10 drawers. Drawers run on 45mm ball bearing slides with a weight capacity of 40kg per drawer. All
drawers fitted with aluminium handles and 2.5mm EVA non-slip liners. Two sets of drawers lock separately for safe storage. All panels made
of perforated steel for hook storage. Supplied with two shelves to be mounted as required. Top of workstation lined with 10mm EVA mat. Four
alloy style 5" castors, two fixed and two swivel with quick release brake. Steel handle at either end for easy mobility.
3. SPECIFICATION
Model No:....................................................AP36MWS ........................................ AP45MWS
(W x D x H):
Overall Size: .............................. 1090 x 730 x 1025mm .......................1290 x 730 x 1025mm
Small Drawer: ........................... 568 x 398 x 75mm (x5) ......................568 x 398 x 75mm (x6)
Medium Drawer: ...................... 568 x 398 x 154mm (x2) ....................568 x 398 x 154mm (x3)
Large Drawer (x1): ...................................................N/A ...........................568 x 398 x 233mm
Cupboard: ...................................... 600 x 255 x 470mm .................................................... N/A
© Jack Sealey Limited
7 DRAWER & CUPBOARD 920MM MOBILE
WORKSTATION & 10 DRAWER 1140MM MOBILE
WORKSTATION
AP36MWS & AP45MWS
MODEL NO:
Original Language Version AP36MWS AP45MWS Issue 2 (5) 24/05/2021