Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
Wear eye
Refer to
protection
instructions
1. SAFETY
Only use on firm, level, unobstructed surfaces which are capable of supporting the trolley.
9
DO NOT overload.
8
Apply the brakes when stationary.
9
DO NOT stand/ride on the trolley, climb on open drawers or allow others to do so.
8
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
9
Two persons maybe required to assemble the unit.
9
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and
‰
situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but
must be applied by the operator.
2. INTRODUCTION
Durable mobile workstation with four drawers and cupboard. Sheet metal drawers with structural foam fronts run on ball bearing drawer slide.
Recessed side and rear panels allow for storage baskets to be fitted where necessary. Supplied with four storage baskets. Four heavy-duty
5" composite castors with rubber over mould, two fixed and two swivel with brake. Structural foam handle with tool storage for quick access to
frequently used tools. Cupboard door fitted with barrel lock and supplied with two keys.
3. SPECIFICATION
MODEL No: ........................................................... AP47PWS
Overall Size (W x D x H): .................... 1210 x 700 x 1000mm
X-Large Drawer (x4)(W x D x H): ............120 x 370 x 480mm
Cupboard (W x D x H): ............................610 x 410 x 490mm
4. CONTENTS
4.1.
Unpack all parts and check against parts diagram below.
4.2.
Tools required: 13mm A/F spanner, No. 2 Cross head screwdriver.
© Jack Sealey Limited
4 DRAWER & CUPBOARD 1210MM MOBILE
WORKSTATION
MODEL NO:
Wear protective
Wear safety
gloves
footwear
Original Language Version
AP47PWS
Wear protective
clothing
fig.1
AP47PWS
Issue 1
11/03/2020
Advertisement
Related Manuals for Sealey AP47PWS
Summary of Contents for Sealey AP47PWS
- Page 1 4 DRAWER & CUPBOARD 1210MM MOBILE WORKSTATION AP47PWS MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. Wear eye Refer to...
- Page 2 Install the pin of door (fig.6.E) into tray (fig.6.A) (fig.6). 5.4. Install castors (fig1.J and fig.1.K) to base (fig.1.B) using 12 nuts and bolts (fig2.BB, fig.2.CC) (fig.7). NOTE: Assemble swivel castors in marked locations (fig.7). fig.6 fig.7 AP47PWS Issue 1 11/03/2020 Original Language Version © Jack Sealey Limited...
- Page 3 To remove drawers (fig.13), fully open empty drawer. Push down on the right release lever while pushing up the left release lever. Pull drawer outward while holding both levers until drawer is released. fig.12 fig.13 AP47PWS Issue 1 11/03/2020 Original Language Version © Jack Sealey Limited...
- Page 4 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...