• Please use approved power cord presentation of the original invoice provided by Philips at all times. If or cash receipt, indicating the date of your power cord is missing, please purchase, dealer’s name and model and contact your local service center.
Page 4
1. Important • Oil-based cleaning solutions may monitor damage will not be covered under warranty. damage the plastic parts and void the warranty. • Do not knock or drop the monitor • Unplug the monitor if you are not during operation or transportation. going to use it for an extensive pe- • Excessive usage of monitor can riod of time.
1. Important period may cause “burn-in”, also 1.2 Notational Descriptions known as “after-imaging” or “ghost The following subsections describe imaging”, on your screen. notational conventions used in this • "Burn-in", "after-imaging", or "ghost document. imaging" is a well-known phenom- enon in LCD panel technology. In Notes, Cautions and Warnings most cases, the “burn-in”...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, This marking on the product or on end-of-life management primarily its packaging illustrates that, under...
Register your product and get support at www.philips.com/welcome * Different according to region. Note 245E1S/245E1 Use only the AC/DC adapter model: Philips ADPC1945EX . * VGA AC/DC Adapter 241E1S Use only the AC/DC adapter model: Philips ADPC1925 . * DP...
Page 8
2. Setting up the monitor Connecting to your PC 245E1S / 245E1 245E1 1. Place the monitor face down on soft AC/DC power input and smooth surface taking care to HDMI input avoid scratching or damaging the Display port input screen.
2. Setting up the monitor Connect to PC 2.2 Operating the monitor 1. Connect the power cord to the back Front view product description of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer.
Page 10
What is On-Screen Display (OSD)? LowBlue Mode 1, 2, 3,4 On-Screen Display (OSD) is a feature in Input HDMI 1.4 all Philips LCD monitors. It allows an end DisplayPort (245E1S/245E1) user to adjust screen performance or Picture Picture Format Wide Screen, 4:3...
2. Setting up the monitor Display of the native resolution alert can 2.3 Remove the Base Assembly be switched off from setup in the OSD for VESA Mounting (On Screen Display) menu. Before you start disassembling the Physical Function monitor base, please follow the instructions below to avoid any possible Tilt damage or injury.
Page 12
2. Setting up the monitor 4. Use a screwdriver to remove the 2. Use a screwdriver to loosen the screws on the arm, and then detach screw located at the bottom of the the arm/stand from the monitor. base, and remove the base from the stand.
Page 13
2. Setting up the monitor contact manufacturer for wall-mount installation. 100mm 100mm 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. 245E1 Why do I need it?
3. Image Optimization 3. The SmartImage on screen display time. Developed for wellbeing, will remain on screen for 5 seconds Philips LowBlue Mode setting uses a or you can also toggle to the left to smart software technology to reduce make confirmation.
4. AMD FreeSync™ • AMD Radeon R7 260X 4. AMD FreeSync • AMD Radeon R7 260 ■ Processor A-Series Desktop and Mobility APUs • AMD A10-7890K • AMD A10-7870K PC gaming has long been an imperfect • experience because GPUs and monitors AMD A10-7850K update at different rates.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type IPS technology Backlight W-LED system Panel Size 23.8” W (60.5 cm) Aspect Ratio 16:9 245E1S/245E1: 0.206 x 0.206 mm Pixel Pitch 241E1S: 0.275 x 0.275 mm Contrast Ratio 1,000:1 (typ.) 245E1S/245E1: 1920 x 1080 @ 60Hz (Analog) Optimum...
Page 18
5. Technical Specifications Plug & Play DDC/CI, Mac OSX, sRGB, Windows 10/8.1/8/7 Compatibility Stand Tilt -5° / +20° Power (245E1S/245E1) AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz Normal Operation 24.6 W (typ.) 24.7 W (typ.)
Page 19
500 to 1060hPa (Non-operation) Environmental ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 23
A red or blue bright dot must be the warranty period, a TFT Monitor more than 50 percent brighter than panel in a Philips flat panel monitor must have pixel or sub pixel defects neighboring dots while a green exceeding the tolerances listed in the bright dot is 30 percent brighter than following tables.
Page 24
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >10mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
Service contact information listed in images over an extended period Important information manual and may cause "burn in", also known as contact Philips customer service "after-imaging " or "ghost imaging", representative. on your screen. "Burn-in", "after- * Functionality different according to imaging", or "ghost imaging"...
Page 28
This may Philips LCD monitor. affect your warranty conditions. • Turn on your monitor and then turn on How should I clean the LCD your PC.
Page 29
PC, workstation or Mac? Q12: Why is my Display not showing sharp text, and is displaying jagged Ans.: Yes. All Philips LCD monitors are characters? fully compatible with standard PCs, Macs and workstations. Ans.: Your LCD monitor works best at its...
Page 30
8. Troubleshooting & FAQs Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
Page 31
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the E Line 241E1S and is the answer not in the manual?
Questions and answers