Panasonic KX-TGA407B Installation Manual page 3

Indicators
STATUS
Red Flashing Off
Red On Off
Off Off
*1 The time elapsed after turning on the range extender while pressing and holding
down {PROGRAM}.
Installation/Registering the range extender to the base unit
1
Range extender: Connect the AC adaptor to a power outlet.
L Use only the supplied Panasonic AC adaptor PNLV226.
L When the unit is turned on, the STATUS indicator and w indicator light amber
for about 2 seconds.
L If the range extender is not yet registered, the STATUS indicator lights amber. If
the range extender is already registered, the STATUS indicator lights red while
the w indicator flashing red.
2
Base unit: Press and hold {LOCATOR} for about 5 seconds.
L Depending on the base unit, a registration tone sounds.
L If all registered handsets start ringing, press the same button to stop. Then
repeat this step.
L The next step must be completed within 90 seconds.
3
Range extender: Press and hold {PROGRAM} for about 3 seconds to enter
the registration mode.
L When the unit is in the registration mode, the STATUS indicator flashing green.
4
Range extender: Release {PROGRAM}
L The STATUS indicator continue flashing green while registering.
L After registration complete, STATUS indicator and w indicator light amber for 2
seconds. Then, the STATUS indicator lights red while the w indicator flashing
red before registration complete.
5
Range extender: Confirm that the STATUS indicator and w indicator light
green. (The unit is ready for use.)
L If the indicators do not light green, re-position the unit in a place where the
indicators light green.
For assistance, please visit http://shop.panasonic.com/support
w/ ID
Entering deregistration mode. (0-10 seconds
Deregistration complete. (after 10 seconds
The power is off.
Press plug firmly.
Meaning
Hook
(120 V AC, 60 Hz)
*1
)
*1
)
3