Fig. 57: Fitting Wall Insert; Table 46: Tightening Torque (72011) - ABB HT593433 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.11 Installing the compressor casing
Fitting wall insert
Fig. 57: Fitting wall insert
Product
A170-M
A175-M
Table 46: Tightening torque (72011)
1. Remove lifting device (90190/90195).
2. Slide wall insert (77000) into compressor casing up to stop and remove guide stud
(90319).
3. Secure wall insert with screws (72011) and washers (72008).
For assembly of the alternative air inlet, see section
© Copyright 2019 ABB. All rights reserved.
Size
M20
M24
Lufteintritte anbauen
HZTL4033_EN
Tightening torque [Nm]
580
1000
→88.
Rev.D December 2019