Connecting A Surround System/Audio System; Connecting A Pc - Sharp AQUOS LC-80LE757U Operation Manual

Connecting to External Equipment

Connecting a Surround System/Audio System

I When connecting an AV amplifi er for a surround system
• Letting the TV output the audio to an AV amplifi er:
*1 When you connect ARC-compatible equipment, use the HDMI IN 1 terminal.
*2 If the equipment to be connected is not compatible with the ARC, connect an optical fi ber cable.
NOTE
• If the image is not in sync with the audio, check the settings of the connected surround system.
I When connecting an audio amplifi er
It is possible to output audio through the DIGITAL AUDIO OUT terminal. (See page 26 for details.)
NOTE
• See page 27 for details on the Output Select function.
LC-80LE857U̲757U̲657U̲E.indd 15
HD Cable/Satellite set-top box
HDMI-certified cable *1
HDMI OUT
OPTICAL
DIGITAL AUDIO INPUT HDMI OUT HDMI IN
Optical fiber cable *2
Optical fiber cable
OPTICAL
DIGITAL AUDIO INPUT
Ø3.5 mm stereo minijack to RCA audio cable
ANALOG AUDIO IN

Connecting a PC

Refer to page 45 for a list of PC signals compatible with the TV.
I When using an HDMI cable (HDMI IN 1, 2, 3 or 4):
NOTE
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed
cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio
Select" to "HDMI+Analog". (See page 44.)
• The HDMI IN terminals only support digital signal.
I When using a DVI-HDMI conversion cable (HDMI IN 2):
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
NOTE
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a Ø 3.5 mm stereo minijack cable to
the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 44.)
I When using an analog RGB cable (PC IN):
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
Ø 3.5 mm stereo minijack cable
NOTE
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 44.)
HDMI-certified cable
HDMI OUT
DVI OUT
AUDIO
AUDIO RGB
2013/02/21 13:35:59
15